-
Senior Member
registered user
Keeping up with the times
.
I notice some peculiar things about tz=localtime in my situation,
where I keep my hardware clock set to local time, and I prefer to see
this local time on any desktop I might be using. The Windows 7 desktop
has no problem with this arrangement, of course. But on this same machine...
My Knoppix 7.0.5 LiveUSB has tz=localtime on the APPEND line of syslinux.cfg;
My Knoppix 7.2 LiveCD has tz=localtime on neither the DEFAULT line nor the APPEND line; and
My Knoppix 7.2 LiveCD-size LiveUSB requires tz=localtime on the DEFAULT line.
-
Hi, @utu.
I am using K 7.2 right now.
I've got the local date and time on the clock by adding tz=localtime in
/mnt-system/boot/syslinux/syslinux.cfg in the line APPEND of the section knoppix:
APPEND lang=en keyboard=es xkeyboard=es apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
-
Senior Member
registered user
Greeting, Porteno.
I don't know why adding tz=localtime to the APPEND line wouldn't work for me
as it did in 7.0.5. I use a CD-size LiveUSB if that makes any difference.
It should be noted that, should I want to use the command 'date', It assumes
the value it is reporting is in UTC unless its given more FORMAT information.
-
I installed Knoppix 7.2 DVD on a flashdrive. I also had trouble with the time. I read through the information posted by others.
I editted this file on my flash drive ... k:\boot\syslinux\syslinux.cfg
In my original syslinux.cfg file , the following records appear at lines 17,18 and 19.
LABEL knoppix
KERNEL linux
APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1
I added "tz=localtime" at the end of record 19 , which starts with APPEND.
APPEND lang=en apm=power-off initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
then saved the file.
I then restarted the computer , booting from the flashdrive .
The correct time is now displayed .
-
With "cat /proc/driver/rtc; date" you can see the time of the BIOS clock and in the last line the time of your panel clock. I allways recomend to use UTC time within the BIOS and "tz=..." in the kernel line with your local parameters - for me "tz=Europe/Berlin".
Code:
$ cat /proc/driver/rtc; date
rtc_time : 17:09:13
rtc_date : 2013-09-11
alrm_time : 00:00:00
alrm_date : 2013-09-12
alarm_IRQ : no
alrm_pending : no
update IRQ enabled : no
periodic IRQ enabled : no
periodic IRQ frequency : 1024
max user IRQ frequency : 64
24hr : yes
periodic_IRQ : no
update_IRQ : no
HPET_emulated : no
BCD : yes
DST_enable : no
periodic_freq : 1024
batt_status : okay
Mi 11. Sep 19:09:12 CEST 2013
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
D-Link DNS-321 Dual Hard Drives/Enclosure - RAID Configuration
$60.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$13.99
Dell PERC V10 Z0017A SAS-SATA RAID Controller Card No Bracket N4C2D 5R10N
$52.97
Yottamaster 2 Bay USB 3.1 RAID Hard Drive Enclosure For 2.5" SATA HDD SSD UASP
$59.99