I believe the DWL-650 is a ACX-100 based Wifi card.
So already tried this ? :
http://www.houseofcraig.net/acx100_howto.php#app_b
I see knoppix 3.4 still uses Orinoco driver for my D-link DWL-650 (prism2) card. This is not the optimal driver, but hostap or wlanng should be used instead. The reasons are the gain of stability and features (master mode).
To fix this i had to:
That is, toughly replace "orinoco" for "hostap".Code:cd /etc/pcmcia for i in config*; do cat $i | sed 's/orinoco/hostap/g' > kk ; mv -f kk $i; done /etc/init.d/pcmcia restart
Is there a better way of enabling hostap driver? Is this already fixed en later releases?
I believe the DWL-650 is a ACX-100 based Wifi card.
So already tried this ? :
http://www.houseofcraig.net/acx100_howto.php#app_b
By the way, DWL-650+ (mind the '+' sign) is the acx100 based.Originally Posted by ktheking
I own both cards, for the second card i must download and compile driver apart (thanks for the link anyway )
I was going to suggest also suppor for acx100 driver, but someone has started a thread on that issue already.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98