-
OpenMosix and DHCP
This might be and probably is a n00b question.....but, how do I go about trying to get a network boot using terminal server if there is already a DHCP sever on the network. Whenever I boot a computer it loads PWE but when it is searching for the DHCP server it always returns the main Windowz server instead of my terminal server. Thus the boot fails. Some times I can get the network boot to load but it is far from a sure thing....
Another question I have is......when asked as to the IP range that the terminal server can delegate do i have to specify a range that is on the same sub domain as the terminal server itself? That is to say if the terminal servers IP is 192.168.20.111 can I specify a range that is 192.168.35.111 192.168.35.254? Also, is the range linked in any way to the IP that the client machine held previously?
Thank you for your time and replies
-
Senior Member
registered user
At home I have a linux router that is a dhcp server and I can PXE boot to a machine running knoppix terminal server or clusterKnoppix openMosix terminal server no problem.
However, at school (win2k) I cannot get the PXE boot disk to discover my terminal server. Go figure.
is the range linked in any way to the IP that the client machine held previously?
No, my machine that boots into linux with dhcp is 192.168.1.66, however when I gave terminal server the address range of 192.168.1.200 - 254 it came up as 192.168.1.200.
rock
-
This is my problem as well. When at home on a simple appliance based network it works. While on a server-delegated network, however, the connection fails. Any help?
-
Does nobody have an answer? I have fiddled with this for a week and gotten nowhere. Anybody! please help me. I really like the idea of a Cluster but need to try it in a workable environment. Any help is greatly appreciated even if it is just speculation on what the problem may be. Once again thank you.
-
Senior Member
registered user
There is no simple way. If you have 2 dhcp servers on one network there isn't much you can do.
-
An answer I feared but suspected. At least I can put it to rest now. Thank you for your reply.
Similar Threads
-
By renaxgade in forum General Support
Replies: 8
Last Post: 12-23-2003, 02:35 AM
-
By cybervet in forum General Support
Replies: 1
Last Post: 10-27-2003, 11:44 PM
-
By ktheking in forum General Support
Replies: 1
Last Post: 08-06-2003, 03:53 AM
-
By tyiooo in forum Networking
Replies: 19
Last Post: 06-11-2003, 09:28 AM
-
Replies: 23
Last Post: 06-06-2003, 12:42 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar
$304.35
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00