I have the same problem. Is there any solution around? What can i config by hand? Is there any error log somewhere? I didn't find anything...
Raphael
i'm testing knoppix 3.6 on a econel 30 server & have a problem with the isdn-config tool: (avm fritz pci card is installed)
the "start" button is not available after i configured my isp settings, i can't connect
when i try exactly the same way in knoppix 3.4, it's no problem to connect to the internet via isdn/avm fritz card; on the same machine.
are there known problems with isdn/avm fritz cards in knoppix 3.6 ?
thanks for any ideas!
zip.it
I have the same problem. Is there any solution around? What can i config by hand? Is there any error log somewhere? I didn't find anything...
Raphael
same Problem for me too
wihle trying to configure with isdn-config there where not entries in /var/log/messages
I then tried to start isdn as root "/etc/init.d/isdn start", after that I tried to dial with "isdnctrl dial ippp0".
In /var/log/messages you can see that there is an attempt to dial but it ends up with
"fcpcipnp0,ch0 cause E001B"
in "man isdn_cause" this meens error location from user (I think my PC) and cause "Destination out of order"
Any hints ???
Thanx,
Achim
Hello,
to make things clearer what happens on my side:
I have 2 PCI Cards sharing the same IRQ11 (my Video-Card and the FritzCard ISDN-Controller) and I have suse 6.3, suse 7.2 and suse 9.2 installed on my system. Using the suse-distributions I have no problem to connect to my provider.
At the moment I think the problem with debian/knoppix is in the "handling" of pci or interrupts but I don't know the modules responsible for that.
There is one last thing I could try: change the physical slot of the ISDN FritzCard, but because the system ddoes well with suse I don't want to to that.
@zip.it and raphaelmack:
try to install with the debian "isdnconfig", this is only text-based but it seems that the right config-files will be written with this tool.
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 100m LC MMF
$68.99
Cisco GLC-FE-100LX 100BASE-LX SFP Transceiver Module
$15.59
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER
$11.90
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00