Type knoppix testcd at startup, Its probably a bad burn.
My new Knoppix CD ver 3.4 boots and starts doing its configuration processes, then stalls in the lollowing step with the message:
"Scanning for harddisk partitions and creating /etc/stab ... insmod: insmod: a module named input already exists .... insmod: insmod: insmod hid failed"
Help is sorely needed. Thanks
WFM
Type knoppix testcd at startup, Its probably a bad burn.
Coud you expand on that explanation? This is a CD from Linus Central.Originally Posted by firebyrd10
Thanks.
When you first boot, type knoppix testcd at the prompt.
Problem resolved. I was simply not waiting long enough for the boot process to complete - it looked completely inactive, but wasn't.
Thanks anyhow.
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c Gen9 Blade 2x E5-2680v3 2.5GHz =24 Cores 256GB P246 650FLB
$430.00