[Solved] Use apt-get update as a super-user to have synaptic working
As usual I use unpacked KNOPPIX_V8.6.1-2019-10-14-EN.iso and booted with Grub to create a persistent system. In general, I have long been using synaptic to install additional software persistent across multiple reboots.
With the current version, I have run into an issue. I get the notice from synaptic:
I checked the /etc/apt/sources.listE: The value 'stable' is invalid for APT::Default-Release as such a release is not available in the sources
E: _cache->open() failed, please report.
The keyword 'stable' shouldn't be an issue, but is presently. Shall the keywords be replaced by exact words? Like stable=buster, oldstable=stretch, unstable=Sid, oldoldstable=jessie and so on?
[Solved] Use apt-get update as a super-user to have synaptic working
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
Dell Poweredge XC730xd 3.5 2x E5-2690 v3 2.6ghz 64gb JBOD 12x Trays 2x1100w
$239.99
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
Dell R730 8B LFF 2x 2.40GHz 14C Intel Xeon E5-2680 v4 32GB RAM 2x 3TB HDD HBA330
$299.99
Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU
$209.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99