Sometimes (not always, but worth a try) it helps to go into the bios and set it to "Non plug and Play OS". Windows will live happily with this and modern Linuxes often demand it.
I have run Knoppix successfully on many computers, both from CD and hard drive. One older computer I wish to run it on gives me an error after detecting all the hardware correctly and stops. After hard drive detection, the screen says "hdd lost interrupt." It generates the same message every 10 seconds or so, but doesn't go any further. It's a Micron Home MPC (from 1997) with an upgraded AMD 400 Mhz processor and 128 MB ram, with the M55-hi plus motherboard. It runs Win2000 Pro fine. Any suggestions will be appreciated, since I want to make it a dual-boot Win-Knoppix (Debian) machine.
Sometimes (not always, but worth a try) it helps to go into the bios and set it to "Non plug and Play OS". Windows will live happily with this and modern Linuxes often demand it.
Thank you, I have plug and play OS set to "no" already. I will try another version of Knoppix with the older kernel.
I figured it out! My hdd drive is an IDE Zip drive on the second IDE channel, slave to the CD-Rom. I have to have a Zip disk (even an empty one) in the Zip drive in order to boot and everythig's fine!
NetGear ProSafe GS748T V4 48-Port Gigabit Smart Switch w/ Ears
$30.00
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97
Cisco Small business SG300-28P Managed 28 Port Gigabit Ethernet Switch
$67.95
Brocade ICX7250-48P-2X10G 48-Port PoE+ Ethernet Network Switch TESTED
$104.95
New Linksys SE3005 5-port Gigabit Ethernet Switch
$18.99
Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch
$21.99
TP-Link TL-SF1005D 5-Port 10/100Mbps Fast Ethernet Desktop Switch
$12.99
TP-LINK TL-SG1024S 24 Port Ethernet Switch
$20.00
ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301
$125.69
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$65.00