-
Knoppix 7.0.5 USB installer (experimental) fix for Dummies
As a new user to Knoppix, and Linux in general, I could not get Knoppix 7.0.5 (Experimental) to install on my USB due to the error message saying that the overlay must be set at 400MB.
I read Straute’sposts, 11 and 21, over and over trying as a FNG to understand what he was advising Philo to do and most importantly, how to do it. So with the little UNIX knowledge I have, I ventured down the following path.
To apply this fix/patch I used vi editor. Google “vi editor commands” if you’re not familiar with vi
1- Open a terminal window and at the “knoppix@Microknoppix:-$” prompt type su then hit[Enter]
2- At the “root@Microknoppix:/home/knoppix#” prompt type “cd /usr/bin” hit [Enter]
3- At the next prompt type “vi flash-knoppix2 [Enter]
4- At the #!/bin/bash prompt, use your down arrow key to scroll down to line “367,1.
You should be on the line that reads “total="$(awk '{print ($1 / 2048 )}'/sys/block/"${FLASH##*/}"/size 2>/dev/null)"
5- Use your right arrow key to scroll over to “total="$(awk'{print”
6- Place your cursor just after the word {print_” and press the letter “i” to Insert characters.
7- Make these changes: {printf ("%d", ($1 / 2048 ) )}’
8- Hit the ESC key, then type “:wq [Enter]” to write and save your changes to flash-knoppix2.
9- Open another terminal window and again type su [Enter]
10- Type “cd /user/bin/ [Enter]”
11- Type “ flash-knoppex2 [Enter]
12- When the “flash-knoppix (as superuser)” window opens, select your USB drive and click on [OK]
13- At the next window select option “p” and click on [OK]
14- You can now proceed with the install without the “overlay must be set at400MB’ message
I hope this is of some helpto those new to Linux and newer to Knoppix.
-
Senior Member
registered user
@ deviouswun
Nicely done and welcome to the forum.
Your helpful tutelage should be much appreciated.
IMO vi is for experts. Not having a UNIX background, per se,
I retreated to Leafpad (or its equivalent) long ago.
Regards, and please continue contributing.
-
KK has already corrected this error with
Code:
..
elif [ "p" = "$METHOD" ]; then
total="$(awk '{print int($1 / 2048)}' /sys/block/"${FLASH##*/}"/size 2>/dev/null)"
..
http://debian-knoppix.alioth.debian....flash-knoppix2
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Systems NCS2K-20-SMRFS-L optical multiplexor CISCO EXCESS
$3599.00
Cisco WS-C4500X-24X-IPB 4500-X 24P RJ45 10Gbps GE IP Base Switch 1 Year Warranty
$385.00
Cisco IE-3000-8TC Industrial Ethernet 8 Ports Managed Switch 1 Year Warranty
$114.00
Cisco WS-C4948-10GE-S Catalyst 4900 Series Layer4 Managed Switch 1 Year Warranty
$115.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco Catalyst WS-C2960-48TT-L V02 48 Port Fast Ethernet Switch
$34.00
Cisco WS-C4948-10GE-S 4948-10GE 48 Port Gigabit +10GB Switch w single AC 15.0 OS
$99.99
Cisco C9300-48 48 Port Switch Dual PSU W/C9300-NM-8X P/N: C9300-48U-A Tested
$799.99
Cisco Catalyst 3650 48-Port Managed PoE+ Gigabit Switch WS-C3650-48FS-E
$55.99