Try setting the bios to "non plug and play OS".
If that doesn't work, come back.
Knoppix version 2003-06-17
P3 866MHZ
128 MB Ram
15GB HD
On board intergrated Video/Sound/NIC
Compaq DeskPro EN
Initially I completed the entire installation and then recieved the KNOPPIX HALTED meesage, remove cd and then power down. Now Im getting errors such as invalid IO or IRQ input, or cannot start KMSERVER etc, I can run this cd or the one burned at slower speeds x4 etc and install fine on other machines, just curious if there is anything I am missing here to run on this box?
Also at Initiating shutdown sequence wav I see:
*Error* Cannot initialize the agpgart module
Cannot allocate memory
INSmod i810 failed etcetc
Grazie~
Warawara
Try setting the bios to "non plug and play OS".
If that doesn't work, come back.
Thanks, I appreciate the response, I'm getting the 3.3 version atm, will attempt install again here shortly.
Cisco ASA5525-FTD-K9 Security Appliance with FirePower Services
$1000.00
Juniper Networks SRX-210 Secure Services Gateway VPN Firewall
$39.99
Sonicwall TZ350 Network Firewall w/ AC Adapter
$99.99
Ubiquiti Networks USG Unifi Security Gateway Router/Firewall
$29.95
SonicWall TZ300 Power Supply Wired Firewall Router Network Security Appliance
$14.50
Dell SonicWALL TZ300 | Firewall Security Appliance
$24.99
OPNsense six-port Gigabit router/firewall on Lanner FW-7535 hardware
$69.00
Fortinet Fortiwifi 60D FG-60D Security Appliance Firewall / VPN w/ AC Adapter
$34.97
SonicWall TZ370 Network Security Appliance Firewall (02-SSC-2825)-Open Box
$604.99
HP T730 THIN CLIENT 8GB RAM 128GB SSD 4 port Gbe NIC GREAT FOR Firewall pfSense
$120.00