it`s quiet easy.... just press the k-menu button ->Knoppix->Network&internet->Configure Networkcard
for commandline just run
/usr/sbin/netcardconfig
or run from console: ifconfig --help (i think this is what you want)
Greetz
SSC
Hi
I would like to set easily network card configuration: speed (10/100), half/full duplex etc. and not only dhcp or static ip
In windows it is very easy but i can't find a gui to make the same with knoppix.
Is there some tools? if not, how can I modity this settings throught command line?
Thanks
Marco R.
Italy
it`s quiet easy.... just press the k-menu button ->Knoppix->Network&internet->Configure Networkcard
for commandline just run
/usr/sbin/netcardconfig
or run from console: ifconfig --help (i think this is what you want)
Greetz
SSC
Hi ssc,
thank for your reply.
I didn't know /usr/sbin/netcardconfig command, I will try it although I think is not possibile to configure all network card settings through k-menu button.
Thanks
you can change this with this command :
mii-tool -F option eth0
possibles options are : 100baseTx-FD, 100baseTx-HD, 10baseT-FD, or 10baseT-HD
netcardconfig or ifconfig are for setting the ip and such, not for the speed
Hi farvardin,
thanks for your reply. I looked at goole for mii-tools and I saw it is what I need.
Thanks
bye
IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED
$99.99
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
$16000.00
IBM System x3250 M4 Server Intel Xeon E3-1220 3.10GHz 8GB RAM No HDDs
$58.52
IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server
$209.98
IBM Power 740 8205-E6C Express 8-SFF Power7 3.55GHz CPU 64GB RAM *No HDD* Server
$191.99
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$26.97
$100.00
IBM Power S822 8284-22A 2.5" 12-Bay 64GB 2X 00ND478 2X 00E2865 *READ*
$599.99
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$319.99