No, you cannot repair the broken installation... why shouldn't I have done it and can I fix this.
HD install warning
I have installed Knoppix 7.2 to the HDD of an old laptop (Pentium 2 mobile CPU @ 300Mhz and 200 Mb ram). All works pretty well considering the low spec. I installed a few things fine then I did a mark all upgrades in synaptic. The upgrade failed and now it's broken and anything I try to install fails. I have trawled the forums and saw reference that you should not try to upgrade the installed packages. What have I done, why shouldn't I have done it and can I fix this. My Linux knowledge is beginner. Many thanks.
No, you cannot repair the broken installation... why shouldn't I have done it and can I fix this.
HD install warning
I should have read that in the first place. My laptop cannot boot from USB and running from cd is too slow. Knoppix runs really well from the hdd install on this slow system so it is a shame it is not 'suitable'. It runs as well as any distro I have tried which is limited by the limited hardware. Thanks for the answer.
Knoppix is a Live Linux CD .... so it is a shame it is not 'suitable'.
Why does it have a hdd installer.
I meant that my laptop is not suitable for running knoppix as I cannot boot from USB. But it does beg the question why is there a hdd installer.
You can do the HW install, but it remains a Live system with all the limitations I've told you. HW install isn't a conjuring trick to change the action of Knoppix.
.
Greetings terrybull & Werner.
I have a similar situation where I'd like to do something like a
"poor-man's hdd install" of Knoppix. That is use a Knoppix LiveCD
to perform a Knoppix "Install to FlashDisk" but issuing the hdd descriptor
instead of a usb descriptor when asked.
I would expect this process to proceed to put something on the hdd,
but that perhaps the boot process would need some re-working, there
likely being some differences in booting hdds rather than usbs.
Somehow I expect the persistence process to be workable as well,
since that was part of the essence of the original "poor-man's install"
I was planning to use the following material as a guide to this
endeavor. Have I got something all wrong here or is this a viable
approach? Thanks in advance.
Read "Poor-Man's Install" at:
http://smtp.knoppix.net/wiki/Categor...e_Installation
See also this ref and its variations:
http://g33kgrrl.wordpress.com/2009/0...livepartition/
Last edited by utu; 05-27-2014 at 12:34 AM.
ICPUG has a response to my post #8 at:
http://knoppix.net/forum/showthread.php?31081-Poor-Man-s-Install-of-Latest-Knoppix
--utu
I've described this in the Wiki => Poor man's install and you'll find there how to boot this install with Grub legacy or Grub2.I would expect this process to proceed to put something on the hdd, but that perhaps the boot process would need some re-working, there likely being some differences in booting hdds rather than usbs.
With this installation method you can install Knoppix for example on a NTFS partition with Windows7 on it or on a ext3 partition with Ubuntu on it. Windows7 or Ubuntu (my examples) will not be damaged by this "Poor man's install" and when your are booting this install for the first time, you'll be asked to create persistent memory (overlay file - not overlay partition).
DELL PowerEdge R730 Server 2x E5-2690v4 2.6GHz =28 Cores 128GB H730 4xRJ45
$458.00
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
Dell PowerEdge R330 Xeon E3-1220 v5 3.0GHz 32gb H330 2x 3.5" Trays SVR 2012
$189.99
HP ProLiant DL360 Gen9 Server 2x E5-2620v4 2.1GHz =16 Cores 32GB P440AR 4xRJ45
$220.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$210.00
HP ProLiant DL360 G9 Server 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 128GB DDR4
$249.99
HPE ProLiant DL380 GEN10 G10 Rack Server - 1X Silver 4208 + 32GB RAM 366FLR
$599.99
DELL PowerEdge R730 Server 2x E5-2697v3 2.6GHz =28 Cores 32GB H730 4xRJ45
$288.00
Dell Poweredge R620 2x E5-2680 2.7ghz 16-Cores / 128gb / H710 / 2x Trays / 750w
$199.99