-
"Warning: Address Line A20 already enabled"
What does this mean, and how can I work around it?
Thanks a lot.
-
Senior Member
registered user
How did you burn the ISO image to the CDR? I googled and found some websites that suggest the A20 error is from a CDR is not burned properly. Fortunately we have a downloading & burning frequently asked questions which will help you burn the ISO correctly, http://www.knoppix.net/wiki/Downloading_FAQ
-
Yea, sorry, I just burned the image wrong... I have a different problem now though =P. Now, when I boot the CD, I get to a Gray screen with and "X" cursor, and nothing happens. The mouse is able to move, so it didn't exactly freeze, but I think the loading process hangs.
-
Senior Member
registered user
Maybe a bad burn. Use boot option "testcd" to check data integrity.
-
Yea, I tested it and I saw that KNOPPIX/KNOPPIX failed the test.
I think I'll try getting the ISO from another mirror, in case something is wrong with the one I have.
-
Administrator
Site Admin-
Originally Posted by
mmelzer2004
Yea, I tested it and I saw that KNOPPIX/KNOPPIX failed the test.
I think I'll try getting the ISO from another mirror, in case something is wrong with the one I have.
There is an md5 file on every mirror that will let you be 100 % certain if the iso is good or not. Checking the md5 checksum makes much more sense than downloading another 694 megs and still not being sure if what you downloaded is good. If you can't be bothered to do the simple steps outlined in the downloading faq to check the md5 sum, then you really should just stick with Windows, you're not well suited to using Linux anyway.
Read the downloading faq for another way to completely avoid the corruption problems seen on the mirrors. It also involves actually learning something.
By the way, I pointed you right to checking the md5 checksum in this other thread you started. But you eventaully came to the conclusion again that you could have a bad download. Why do you ask for advice but then ignore it?
Similar Threads
-
By caola in forum Networking
Replies: 1
Last Post: 03-26-2007, 08:58 AM
-
By rharazin in forum General Support
Replies: 2
Last Post: 12-11-2006, 04:31 PM
-
By alsdaboss in forum MS Windows & New to Linux
Replies: 1
Last Post: 03-23-2006, 05:00 PM
-
By LukeyBoy in forum General Support
Replies: 3
Last Post: 03-24-2004, 02:35 PM
-
By geebee2000 in forum Hardware & Booting
Replies: 9
Last Post: 05-21-2003, 07:29 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$13.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$99.99
Dell KMCCD PERC H730 MINI MONO 1GB RAID CONTROLLER W/Battery
$26.99
Yottamaster 2 Bay USB 3.1 RAID Hard Drive Enclosure For 2.5" SATA HDD SSD UASP
$59.99