If you want to start with Adriane in a HD installation rename '/etc/inittab' to '/etc/inittab_orig' and copy '/etc/inittab.adriane' to '/etc/inittab'.
Hello!
I've installed Knoppix to hard drive using 0wn. I want to set it up to boot in Adriane mode, and tweak the menu for my father.
I tried to add "adriane" at Grub boot line, but it keeps booting in graphical mode.
I've downloaded the DVD version 7.4.2 and I used Unetbootin to put it in a pendrive (USB flash drive). I've found that the DVD boot process is different from the hdd install boot process. The DVD's seems to change /etc/inittab, /etc/sudoers and /etc/PolicyKit/PolicyKit.conf from some init script. But I don't know how to set this up for the hdd.
So, what are my options to change the boot process in the hdd install? Keep in mind, that I would like to change the default Adriane menu, and I'm not planning to remaster a Knoppix/Adriane DVD
Finally: Thank you, Klaus, for mastering this distro! : - D
Thanks in advance for your time and your advice,
Regards,
-- Knoforus
If you want to start with Adriane in a HD installation rename '/etc/inittab' to '/etc/inittab_orig' and copy '/etc/inittab.adriane' to '/etc/inittab'.
Thanks Werner! It worked as you said. ^_^
Regards,
-- Knoforus
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
$209.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
1U Server (6-8 VM's) Vsphere VPS Short Depth 20" XEON 3.5Ghz 32GB RAM X10SLM-F
$199.00