Results 1 to 3 of 3

Thread: >>>>>>>>Problem to connect PPPOE A

  1. #1
    Junior Member
    Join Date
    Jun 2004
    Location
    Chile
    Posts
    3

    >>>>>>>>Problem to connect PPPOE A

    I Have some thing like this configured on my pc:

    root@osomauri:~# ifconfig
    eth0 Link encap:Ethernet HWaddr 00:00:E8:81:A1:2D
    inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:44 errors:0 dropped:0 overruns:0 frame:0
    TX packets:53 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:100
    RX bytes:2669 (2.6 KiB) TX bytes:3234 (3.1 KiB)
    Interrupt:9 Base address:0x4000

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:20 errors:0 dropped:0 overruns:0 frame:0
    TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1304 (1.2 KiB) TX bytes:1304 (1.2 KiB)

    root@osomauri:~# poff
    /usr/bin/poff: No pppd is running. None stopped.
    root@osomauri:~# pon dsl-provider
    root@osomauri:~# plog
    Jun 1 22:08:21 osomauri pppd[785]: Using interface ppp0
    Jun 1 22:08:21 osomauri pppd[785]: Connect: ppp0 <--> /dev/pts/0
    Jun 1 22:08:24 osomauri pppd[785]: Remote message: Request Denied
    Jun 1 22:08:24 osomauri pppd[785]: PAP authentication failed
    Jun 1 22:08:27 osomauri pppd[785]: Modem hangup
    Jun 1 22:08:27 osomauri pppd[785]: Connection terminated.
    root@osomauri:~# if
    if ifconfig ifdown ifnames ifport ifup ifuser
    root@osomauri:~# ifconfig ppp0
    ppp0: error fetching interface information: Device not found


    and i try , cheking : /etc/ppp/pap-secrets, and clear the word "username"
    ...this was not there ...

    I really donīt know more to do it. i have knnopix , 3.3 instaled on Hd.

    Can you supportme o give me ideas please, thank for your help .


    * and of course it is my username and pass correcto... i say for the error before.


  2. #2
    Senior Member registered user
    Join Date
    Mar 2004
    Location
    Berlin
    Posts
    436
    I'm no expert in ppp/ dsl/ pon, but I show you my settings:

    [/code]
    #---ppp/peers/dsl-provider, end -----------------------
    # Asynchronous-Control-Character-Map (ACCM)
    default-asyncmap

    user "ar0123456789"
    usepeerdns

    #---ppp/pap-secrets, end -------------
    # If you have different providers with different passwords then you better
    # remove the following line.

    alpha * password
    "ar0123456789" * "45645645"
    [/code]
    Of course this is my real username and password...

  3. #3
    Member registered user
    Join Date
    Apr 2004
    Posts
    34

    lol

    what kind of modem is it ?
    does your connection pass through eth0 ?
    i am not sure your log and pass are right ==> i had already the prob ==> for each time it was a login/pass prob
    you can clean resolv.conf
    then after attempting to connect, you check if your provider has sent the dns to you

Similar Threads

  1. Knoppix hdd + PPPoE
    By Hese in forum Networking
    Replies: 4
    Last Post: 09-05-2004, 11:08 AM
  2. Replies: 0
    Last Post: 09-25-2003, 01:08 PM
  3. ADSL/PPPoE Configuration Problem
    By Zapata in forum Networking
    Replies: 3
    Last Post: 08-31-2003, 08:39 PM
  4. adding DSN to PPPOE
    By ronin1967 in forum Hardware & Booting
    Replies: 1
    Last Post: 02-18-2003, 04:43 AM
  5. Replies: 1
    Last Post: 01-31-2003, 01:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper SRX650 VPN Firewall Security Hub SRX650-BASE-SRE6-645AP w/SRX-GP-IM picture

Juniper SRX650 VPN Firewall Security Hub SRX650-BASE-SRE6-645AP w/SRX-GP-IM

$99.99



Juniper MX-MPC2-3D-A Router Card + MIC-3D-4XGE-XFP-A & MIC-3D-20GE-SFP picture

Juniper MX-MPC2-3D-A Router Card + MIC-3D-4XGE-XFP-A & MIC-3D-20GE-SFP

$799.99



JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER picture

JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER

$210.00



Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch picture

Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch

$89.00



Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$40.18



Juniper EX2300-24P Poe+ Rack Mountable Ethernet Switch picture

Juniper EX2300-24P Poe+ Rack Mountable Ethernet Switch

$130.00



Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord picture

Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord

$53.99



Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P picture

Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P

$299.99



Juniper QFX5100-48T-AFO   48 100M/1G/10G Base-T 6 QSFP AFO picture

Juniper QFX5100-48T-AFO 48 100M/1G/10G Base-T 6 QSFP AFO

$485.00



Juniper Networks EX3400-48T 48 Port Gigabit 4 SFP 1/10G Network Switch #73 picture

Juniper Networks EX3400-48T 48 Port Gigabit 4 SFP 1/10G Network Switch #73

$239.99