Try manually getting one via dhcp
ifconfig ath0 up
pump -i ath0
I have a dell laptop with Knoppix 3.9 installed. I bought a new Proxim gold card that uses Atheros (madwifi) drivers. It works ok on my network with my windows setup but I am having an issue with Knoppix 3.9. Knoppix ses the card and with IWCONFIG and KWIFIMANAGER I can see my network and even other networks in my area but I am not getting an IP address. I made sure that Encription and Mac address filtering were turned off and I still can not get IP. Again it works ok with my windows setup but not knoppix.
My Knoppix setup does work with my linksys card but I really wanted to use the proxim because of the external antenna.
Any ideas of what I am doing wrong?
Try manually getting one via dhcp
ifconfig ath0 up
pump -i ath0
I did not know that pump command but it worked!!!Originally Posted by foamrotreturns
Thanks big time!!
There are too many dhcp commands to remember these days and it seems every distro uses a different one.
for future reference, and if that one doesn't work for you (you being any person reading this thread) you might try these as well:
dhclient
dhcpcd
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid
$44.99
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$116.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
RAID Enclosure - 2 Disks - 3.5" or 2.5" RAOD 0, 1, JBOD - RAID Switch on Device
$46.65
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00