-
USB 2.0 Support?
I've just downloaded knoppix build 2003-01-01
It booted fine and detected all my USB 2.0 peripherals (harddrive, CD-R/RW, hub, pcmcia host controller) but they've come up only at USB 1.1 speeds.
Does anyone know how I can make it run at the full USB 2.0 speed?
The harddrive is so slow at 12 Mbps!
Thanks
-
Senior Member
registered user
Re: USB 2.0 Support?
' modprobe ehci-hcd '
From /usr/src/linux-2.4.20-xfs/Documentation/usb/ehci.txt
[[
The EHCI driver is used to talk to high speed USB 2.0 devices using
USB 2.0-capable host controller hardware. The USB 2.0 standard is
compatible with the USB 1.1 standard. It defines three transfer speeds:
- "High Speed" 480 Mbit/sec (60 MByte/sec)
- "Full Speed" 12 Mbit/sec (1.5 MByte/sec)
- "Low Speed" 1.5 Mbit/sec
USB 1.1 only addressed full speed and low speed. High speed devices
can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
USB 1.1 devices may also be used on USB 2.0 systems. When plugged
into an EHCI controller, they are given to a USB 1.1 "companion"
controller, which is a OHCI or UHCI controller as normally used with
such devices. When USB 1.1 devices plug into USB 2.0 hubs, they
interact with the EHCI controller through a "Transaction Translator"
(TT) in the hub, which turns low or full speed transactions into
high speed "split transactions" that don't waste transfer bandwidth.
At this writing, this driver has been seen to work with implementations
of EHCI from (in alphabetical order): Intel, NEC, Philips, and VIA.
]]
Originally Posted by
Tom
I've just downloaded knoppix build 2003-01-01
It booted fine and detected all my USB 2.0 peripherals (harddrive, CD-R/RW, hub, pcmcia host controller) but they've come up only at USB 1.1 speeds.
Does anyone know how I can make it run at the full USB 2.0 speed?
The harddrive is so slow at 12 Mbps!
Thanks
Similar Threads
-
By alexjenx in forum Hardware & Booting
Replies: 1
Last Post: 05-27-2004, 01:08 AM
-
By langhaarrocker in forum Customising & Remastering
Replies: 2
Last Post: 05-22-2004, 07:45 PM
-
By dork in forum General Support
Replies: 0
Last Post: 05-05-2004, 06:12 PM
-
By baldyeti in forum The Lounge
Replies: 3
Last Post: 11-28-2003, 11:18 PM
-
By ranch137 in forum General Support
Replies: 2
Last Post: 04-16-2003, 06:08 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP ProLiant MicroServer Gen8 G8 G2020T 8GB RAM 4x 1TB HDD 4x 3.5" 712318-421
$269.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
HP ProLiant MicroServer Gen8 Desktop Computer Intel Core i3-3240 8GB Ram
$224.99
Supermicro Server 505-2 Intel 2.4GHz 16GB SYS-5018A-FTN4 - pfSense Compatible
$220.48
DATTO-1000 Mini PC Micro Server 8GB RAM
$67.48
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.48
supermicro 512
$100.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00
Supermicro 2U Server 12 Caddy Bay 3.5 LFF E ATX Storage Chassis SAS2 6GBPS Rail
$199.00