-
Junior Member
registered user
how do I force detection of my PCMCIA modem?
I've checked using lsmod and the pcmcia_core isn't loaded. I can
load it using modprobe but I'm kinda stuck as to where to go from there.
If I go to KPPP I can't seem to get it to see my modem.
I'm afraid that my installation (on hd) was complicated because I used
"nopcmcia" in order to boot from CD (as with Transmeta notebooks my
Sony micro-laptop uses a funky PCMCIA modem). So I did the "ide2=0x180 nopcmcia" option.
Anyway, I want to (1) be able to force the detection of new PCMCIA
devices on my laptop (I have at least three cards I want to be able to
use at various times - a Fast Ethernet card, a wireless Orinoco card, and my New Media 56k modem).
I've checked the Docs section of the site and haven't found a lot on PCMCIA modems or on forcing hardware detection post-hd install.
Can anyone offer a pointer to docs or some direct advice on the issue?
I promise to write it up in a HOWTO and add it to the WIKI once I figure out how to do this (if it hasn't already been done and I missed it).
Thanks!
Stefan
I have the May 3 distribution of Knoppix 3.2.
-
Senior Member
registered user
Re: how do I force detection of my PCMCIA modem?
Originally Posted by
stefan_isaacs
I've checked using lsmod and the pcmcia_core isn't loaded. I can
load it using modprobe but I'm kinda stuck as to where to go from there.
If I go to KPPP I can't seem to get it to see my modem.
I'm afraid that my installation (on hd) was complicated because I used
"nopcmcia" in order to boot from CD (as with Transmeta notebooks my
Sony micro-laptop uses a funky PCMCIA modem). So I did the "ide2=0x180 nopcmcia" option.
Anyway, I want to (1) be able to force the detection of new PCMCIA
devices on my laptop (I have at least three cards I want to be able to
use at various times - a Fast Ethernet card, a wireless Orinoco card, and my New Media 56k modem).
I've checked the Docs section of the site and haven't found a lot on PCMCIA modems or on forcing hardware detection post-hd install.
Can anyone offer a pointer to docs or some direct advice on the issue?
I promise to write it up in a HOWTO and add it to the WIKI once I figure out how to do this (if it hasn't already been done and I missed it).
Thanks!
Stefan
I have the May 3 distribution of Knoppix 3.2.
As far as I know, PCMCIA system needs three modules :
1. pcmcia_core
2. yenta_socket or tcic or i86365(check the actual file name), depends on what chipset etc. is used for the PCMCIA hardware
3. cardmgr(a program, not module)
after loading these three, it is a matter of modifying the files under /etc/pcmcia so the correct device driver(for the PCMCIA device inserted) would be loaded.
-
Junior Member
registered user
nearly there.. now just a PPP problem
I think I'm nearly there. I went to /etc/init.d and fired up the pcmcia service (and thus got the yenta thingie and cardmgr). I was able to find the modem and configure it from KPPP and dial out.
I get a solid connection and then I get the notice that my computer is starting pppd. But pppd times out and kills itself. Any ideas as to why?
I was thinking the pppd daemon should already be running, but I don't
know where to begin looking for it.
Maybe I'm misconfigured?
thanks for the help!
cheers,
S.
Similar Threads
-
By AlBorland in forum Laptops
Replies: 0
Last Post: 08-30-2004, 09:40 AM
-
By beecee in forum Hardware & Booting
Replies: 1
Last Post: 03-16-2004, 11:58 PM
-
Replies: 2
Last Post: 11-25-2003, 12:21 PM
-
By borisp71 in forum Networking
Replies: 1
Last Post: 08-17-2003, 04:52 AM
-
By moosedaddy in forum Hardware & Booting
Replies: 2
Last Post: 01-24-2003, 02:53 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
CORSAIR Vengeance LPX 32GB 2x16GB DDR4-2666 PC4-21300 288Pin 2666Mhz Memory Ram
$99.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$21.50
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
Crucial 16GB (2x 8GB) Kit DDR3L 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM
$23.33
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$33.99
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Klevv 32gb (2x16gb) DDR4 Ram Kit
$90.00
HyperX FURY DDR4 8GB 16GB 32GB 3200MHz PC4-25600 Desktop RAM Memory DIMM 288pins
$72.93