-
On exit : dirty bit is always set
Earlier versions of KNOPPIX always automatically unmounted any mounted devices on "halt" (init 0) or "reboot" (init 6) if the user had forgotten to do so.
Recently (since at least 7.4.2, maybe a lot earlier) this kind feature was removed; and then, in any future session, attempting to mount an external device, one might get the error message "device not properly unmounted". No problem, easily managed.
But on 8.2.0 I find that the boot device is itself left "dirty". Bu this I mean:
I operate KNOPPIX from a USB boot flash drive /dev/sda1. Every time I start up, if I try
$ dosfsck -r /dev/sda1
then I get
0x41 : Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
So, on exiting KNOPPIX, not even the boot device (let alone any others mounted during a session) is unmounted. This, surely, is an oversight.
Can anything be done manually just before exit? I tried the obvious "umount /dev/sda1" and "umount /mnt-system" but got the same error message "device is in use".
Any ideas? Thank you for your help!
Fergus
-
Hi Fergus,
I am a very very newbie!
I suggest you to exit "PROPERLY ALL APPLICATIONS"
opened ( included those you MIGTH have forgotten!!!!).
before "exiting any SESSION".
I haveencountered almost such a problem with some
older versions.
I used the "trick" completed, sometimes, with the "windows
chkdsk program" (the corresponding of"fsck program"
on the the "Fat Partition"
Good luck !
knp
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Factory new Sealed SRX-GP-16GE-PoE Juniper Networks expansion module
$79.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$38.49
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks SRX345 Service Gateway 8 Port Gigabit 8 SFP 1G
$229.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper QFX5200-32C-AFO QFX5200 32 Port QSFP 40/100G AFO Front to Back Airflow
$1349.00
Juniper EX3300-48P, 1 Year Warranty and Free Ground Shipping
$54.00
Juniper Networks EX3300-48T 48-Port Gigabit Ethernet Switch 4x SFP+ TESTED
$99.99
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00