-
Can't find Knoppix filesystem
I have a functioning Knoppix CD which I frequently use in my (relatively) new P4 system.
However, I recently made a boot floppy to use this same CD in my ten year old Pentium MMX system (which can't boot from CD).
Everything seems to work fine, as Knoppix finds my SCSI Plextor CD-ROM and uses fdomain.o, but it then scans multiple directories and gives me the error "Can't find Knoppix filesystem..." and something about a "(very limited) shell".
Any thoughts?
BTW, I'm new to Linux and Knoppix...
-
Senior Member
registered user
I know that you say you have a functioning knoppix cd, but you ought nevertheless to check the integrity of the disk. Try booting from the computer that works, but boot with the following cheat code: knoppix testcd
The only other thing I can think of is if your mmx machine as a really small amount of ram.
-
Used testcd cheat code, and everything checked out ok.
The MMX machine has 96Mb of RAM...
-
Being new... does the lack of replies indicated that:
(1) I've posted this in the wrong place
(2) This is a silly question that's been rehashed dozens of times, or
(3) Nobody has any insight as to what's wrong with my system...
-
Knoppix 3.3 and KnoppMyth
I also have this error. I tried Knoppix 3.3 on a machine at work, and got this error. A week later, I tried to install KnoppMyth on a computer at home and got the same error. I don't know what version Knoppix KnoppMyth is based on, but the only similarity I found between the two installs was both computers are Dells. One a Dimension 4400 & the other a Precision 450.
I did some research:
http://www.knoppix-std.org/faq.html
and found this:
I get the error “Can't find Knoppix filesystem.” then it drops me to a “limited shell”. What the hell?
This means you are not using a SCSI or IDE CDROM drive. After Syslinux starts up the first thing Knoppix wants to do is find and uncompress the filesystem (that big KNOPPIX file on the CD). Knoppix only probes for the CD on all SCSI and IDE buses. If it can't find it you'll get the error above.
For Transmeta laptops and some Sonys with PCMCIA cd drives try:
knoppix ide2=0x180 nopcmcia
Now I'm a bit confused, because both of my machines have the standard CDROM on the IDE bus. So, I don't get it. Maybe a problem with dells?
Hope that helps.
Similar Threads
-
By boomer777 in forum Hardware & Booting
Replies: 0
Last Post: 06-11-2005, 10:26 PM
-
By mariuss in forum Hardware & Booting
Replies: 2
Last Post: 02-23-2005, 02:48 AM
-
By colonius in forum Customising & Remastering
Replies: 1
Last Post: 11-20-2004, 06:09 PM
-
By pskipw in forum General Support
Replies: 0
Last Post: 05-07-2004, 06:16 AM
-
By sfit in forum Customising & Remastering
Replies: 1
Last Post: 03-18-2004, 05:50 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar
$304.35
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 2x10G+2x1G NIC 2x750W PSU
$399.04
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon E5-2699v4 SR2JS 2.2GHz 22-Core 55MB 145W Server Processor CPU
$144.95
Rare WaterCooled HP Z800 Workstation Dual Xeon X5680 16GB RAM 120GB SSD Nvidia
$279.56
Dell Precision T5600/t5610 Xeon E5-2670 2.6Ghz 16GB DDR3 RAM NO HDD Nvidia
$90.00