If you want to start with Adriane in a HD installation rename '/etc/inittab' to '/etc/inittab_orig' and copy '/etc/inittab.adriane' to '/etc/inittab'.
Hello!
I've installed Knoppix to hard drive using 0wn. I want to set it up to boot in Adriane mode, and tweak the menu for my father.
I tried to add "adriane" at Grub boot line, but it keeps booting in graphical mode.
I've downloaded the DVD version 7.4.2 and I used Unetbootin to put it in a pendrive (USB flash drive). I've found that the DVD boot process is different from the hdd install boot process. The DVD's seems to change /etc/inittab, /etc/sudoers and /etc/PolicyKit/PolicyKit.conf from some init script. But I don't know how to set this up for the hdd.
So, what are my options to change the boot process in the hdd install? Keep in mind, that I would like to change the default Adriane menu, and I'm not planning to remaster a Knoppix/Adriane DVD
Finally: Thank you, Klaus, for mastering this distro! : - D
Thanks in advance for your time and your advice,
Regards,
-- Knoforus
If you want to start with Adriane in a HD installation rename '/etc/inittab' to '/etc/inittab_orig' and copy '/etc/inittab.adriane' to '/etc/inittab'.
Thanks Werner! It worked as you said. ^_^
Regards,
-- Knoforus
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c G9(Gen9) 2x 10 CORE E5-2660v3 2.6GHz 128GB RAM No SSD
$222.00
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.54
727021-B21 HP ProLiant BL460c G9(Gen9) E5 10Gb FlexibleLOM CTO Blade Server
$66.00
Dell PowerEdge M640 Barebone Server Blade No Hard Drive Trays
$499.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$290.00
HP ProLiant BL460c Gen9 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB P246 650FLB
$286.00