If you can boot with the regular knoppix cd, just use "dmesg"!
I have build a 2.4.24 kernel with the serial console built-in, and have remastered my KNOPPIX CD to use isolinux. I have added "serial 1 9600" to my isolinux.cfg, and have added "console=ttyS1,9600n8" to the append line of all kernels. Also I have modified the inittab to put a serial console on ttyS0 and ttyS1. Isolinux on boot will output to serial, once the kernel is loaded I get no more output until getty is started by init and I am able to log in.
I need to be able to see what is going on during boot. Any ideas??
Thanks
Tim
If you can boot with the regular knoppix cd, just use "dmesg"!
Yes I could use dmesg, but I need the capability of seeing the boot processes through the serial port. The machine that will be using this remastered version will be headless and w/o a video card.
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$157.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
Seagate ST9450404SS 9PY066-080 Savvio 450GB 10K 10k 2.5" 6G SAS Hard Drive
$15.00
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.49
WD 4TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0040BBK-WESN
$69.99
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$35.99