I don't know what's going on exactly, but I've been getting flash drive corruption when booting with UEFI on my HP EliteDesk 800 G1.
I boot with the Knoppix 8.2 DVD, install to flash drive with fat32 and a persistent image file and reboot.
In the bios startup boot menu (F9 on the HP) I get two selections for my flash drive boot, the same drive listed in two locations: one in UEFI and the other in Legacy mode.
I thought, oh it will boot into UEFI mode, let's try it!
It seems like every time I've tried a UEFI boot it will clobber my flash drive, overwriting the first sectors of the flash drive and in general corrupting it.
I start seeing a bunch of inode errors in my dmesg log.
It's done this a couple of times now, so I'm going to see if just booting with Legacy mode will be safe.
It could be the HP system, the flash drive, or maybe booting with UEFI mode.
Cisco ASA5525-FTD-K9 Security Appliance with FirePower Services
$1000.00
Juniper Networks SRX-210 Secure Services Gateway VPN Firewall
$39.99
Sonicwall TZ350 Network Firewall w/ AC Adapter
$99.99
Ubiquiti Networks USG Unifi Security Gateway Router/Firewall
$29.95
SonicWall TZ300 Power Supply Wired Firewall Router Network Security Appliance
$14.50
Zyxel ATP200 Firewall for Office
$305.00
Dell SonicWALL TZ300 | Firewall Security Appliance
$24.99
OPNsense six-port Gigabit router/firewall on Lanner FW-7535 hardware
$69.00
Fortinet Fortiwifi 60D FG-60D Security Appliance Firewall / VPN w/ AC Adapter
$34.97
SonicWall TZ370 Network Security Appliance Firewall (02-SSC-2825)-Open Box
$604.99