I've switched my old 21" Sony monitor with a Samsung SyncMaster 173S flat panel. After the switch, the quality of the display is not as desirable, so I decided to change the monitor setting through the control center. I saved the changes and reboot the machine. My nightmare started.
Now once I boot the machine, I have the message "Video mode not supported" message. I tried booting from my knoppix CD and setting the display to the lowest resoluation and refresh rate, hopping that I can get back to a good start and trying reseting the Monitor, but nothing works.
I read in this forum that I can use the "knoppix" command. But I can't find the path to the command. Can somebody please help? thanks!
Apple Mac Powerbook Duo 230 Vintage Laptop
$60.00
Apple 4.3GB SCSI Hard Disk Drive RARE Vintage Macintosh Mac IIgs Lacie M2115
$250.00
Vintage M0110A 128k 512 Mac Plus + Keyboard W/ Cable Tested All Keys Working
$98.00
Vintage Macintosh 512k Motherboard With 400K Roms Tested Working 512k Computer
$79.00
Vintage APPLE MACINTOSH SE/30 EMPTY CASE w/DISK DRIVE Compact Plus Housing
$75.00
Vintage Apple Powerbook 540c Laptop Working with Original Powercord | Mac OS
$550.00
Vintage Apple M2115 External Hard Drive, Dive Not Included
$64.99
Vintage Apple Macintosh Plus 1MB Desktop Computer - M0001A No HDD EL4284
$49.99
Apple Macintosh LC Desktop Vintage Computer | Macintosh LC with 12" RGB Display
$199.95
Apple Macintosh SE/30 M5119 Vintage Mac Computer BAD FLOPPY DRIVE FOR PARTS
$350.00