wow! i have used knoppix on PII@233Mhz and 128M ram just fine. so your should work great
I read the minimum system requirements for Knoppix on the site, but was wondering, with these specs, will I have good quality?
AMD 3500+ (Roughly 2.2 GHz)
192 RAM (512 total 256 taken up by video, dont know about the other part...its a compaq =(
200 GB HDD
Thanks
wow! i have used knoppix on PII@233Mhz and 128M ram just fine. so your should work great
Thanks for the quick response.
How about a laptop with a dead (primary)cd drive
Da Cider:
I am studying the possibility of copyng the entire CD on a flash card and use it in the PCMCIA port of my old laptop(using a CF to PCMCIA adapter), and telling the BIOS to boot first from there. It is easier said than done, but worth a try as son as I get a CF card big enough. If your laptop has a USB port, and the BIOS allows to boot from there, use a jump drive to try it out! It could work, it could not, but it is worth a try!
Gabriel
New Juniper MX204 Router MX204-HW-BASE Junos-64 Dual AC Power
$8750.00
Juniper SRX1500-SYS-JB-AC SRX1500 Services Gateway-Dual Power JPSU-400W-AC
$1784.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.18
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper Networks EX3400-48T 48 Port Gigabit 4 SFP 1/10G Network Switch #73
$239.99
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00