-
simple Noob Question
hey
this is the first time i've used any variant of linux..
and the gr8 thing was it worked the first time
teh gr8 knoppix...even all the config with mycable modem was done automatically...guess that wats so cool about it...
I downloaded amsn and some how found a way to run it...
but the thing is when i downloaded it i made a folder and put the files in ramdisk i think with the other folders being desktop and somethign else....
the question is where is this file stored the RAM or the harddrive partition...??
and will those files disappear if i reboot(yes/no)?
thnx guys...and hail knoppix.
-
Senior Member
registered user
Zombi3,
I think I can answer that, even though I am just getting my feet wet in the Knoopix World...
Answer:
If you are running Knoppix from the CD - YES - when you reboot, the files will go bye-bye. Chances are, the files exist on the RamDrive. Even if you installed/downloaded the files/programs to a Windows (fat16/32) hard drive - the problem is that Knoppix, or the Kernel of Linux, the OS, resides on the CD - and gets placed back fresh each time you boot, back into the RamDrive.
If you installed Knoppix from the CD to your hard drive, and are booting w/o the CD - then NO - when you reboot the files are part of the Kernel, or the file system controled by Knoppix, or more appropriatly, Debian.
Summary:
Since you stated that you poped the CD in, I assume you are running from the CD, and thus, on the RamDrive - which evaporates when you reboot/shutdown Knoppix.
Hope this helps,
Cuddles
-
thanx man
that clears it up...
fast response
l8r
-
If you were trying to find out something about Windows, you'd still be on hold.
-
Junior Member
registered user
How true!
Oh, and you'd be out $100. And, you still may not get your question answered! :P
The reason I held off on this question is because I wasn't sure about the "saving configuration" stuff. There is an option to save stuff to the hard drive, but I haven't used it -- I have a full Knoppix HD install.
-
I can confirm that. I got a service call today (win 98SE user) that said that MS wasn't going to answer unless they paid for the support, because it is an outdated OS. They were on the phone for a long time and got disconnected 5 times! It was only a "how do I connect to the internet" question.
Similar Threads
-
By nicdev05 in forum Customising & Remastering
Replies: 1
Last Post: 03-31-2005, 07:59 PM
-
By RandomGoon in forum Networking
Replies: 2
Last Post: 12-18-2004, 05:59 AM
-
By SnipingWolF in forum General Support
Replies: 2
Last Post: 11-20-2004, 06:27 AM
-
By Cuddles in forum General Support
Replies: 8
Last Post: 02-27-2004, 10:09 PM
-
By VeeDubb in forum General Support
Replies: 3
Last Post: 04-03-2003, 02:49 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M5 V07 Blade Server chassis with (2x) Heatsinks
$299.99
Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 36T 2.60GHZ 768GB RAM No HDD
$1000.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M620 Blade Server
$39.99
DELL PowerEdge M630 Blade 2x E5-2687Wv3 3.1GHz =20 Cores 32GB H330 2x10Gb X520
$200.00