This is simple, but did you check all your permission settings?
Hi, I've checked the archives and haven't been able to see my problem addressed. If this is a redundant post, please forgive me and point me towards the relevant post.
When I boot from the Knoppix cd I am able to read from my FAT32 partitions, but not write to or delete.
After I did a hard drive install, Debian now boots but I am unable to read these partitions. fstab does indicate that these partitions exist, but I'm not able to mount these partitions. I have tried a few different commands to no avail.
I'm under a bit of a time constraint as I'm going on tour in three weeks and would like to get a bunch of the data on the fat32 partitions onto discs. I have tried reinstalling windows and have run into huge problems there.
Any help that could be provided would be great, and responses off-list are okay.
ultimates[at]thewailingultimates.com
This is simple, but did you check all your permission settings?
this may be naive but i assumed that if i was logged in as root i'd have full administrative permissions.
as i type this i'm running the knoppix live cd again. i've changed the writable status of all partitions which solves the deletion problem (funny how patient observation can come in handy). once i move them off this computer to my ftp i'm going to change all partitions to ext2 and start from scratch. thanks for your quick reply, sorry if this was a waste
As root, go to /etc/fstab
open it up in an editor and remove any lines begining with a # except the one which starts
# partitions found by Knoppix
you can then reboot and do (as root)
mount -t vfat /dev/hd? /mnt
(take the cue from /etc/fstab as to what the hd? should actually be)
cd to /mnt
do an ls
and you should see all your Windows stuff. (If you want to do it graphically, try Kmenu > Systems > More Programs > File Manager Super User Mode).
This assumes a HD install.
or maybe cd to /mnt and add the mountpoints...at least i have to.
* * * * * *Thanks, fingers99, I had the identical problem and that fixed it right up. I am still having a problem, though. I don't know how to keep those FAT32 Partitions mounted the next time I boot up, or, barring that, get Linux to re-mount them automatically on startup. Any ideas (anyone) You can tell, I'm really new to Linux.Originally Posted by fingers99
Post your /etc/fstab file
~rock
* * * *After digging for a while online, I changed my fstab to this:
* * * *It seems to work, but when I log in as somebody other than root, the drive will appear mounted on my Desktop, but the partition will be empty when I click it.*Code:/dev/hda3 / ext2 defaults,errors=remount-ro 0 1 /dev/hdb6 none swap sw 0 0 /dev/hda6 /mnt/Documents vfat defaults 0 0 /dev/hdb7 /mnt/Multimedia vfat defaults 0 0 proc /proc proc defaults 0 0 /dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0 /dev/cdrom /cdrom iso9660 defaults,ro,user,noexec,noauto 0 0 # partitions found by Knoppix
CORSAIR Vengeance LPX 32GB 2x16GB DDR4-2666 PC4-21300 288Pin 2666Mhz Memory Ram
$99.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$21.50
Crucial 16GB (2x 8GB) Kit DDR3L 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM
$23.33
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$33.99
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
HyperX FURY DDR4 8GB 16GB 32GB 3200MHz PC4-25600 Desktop RAM Memory DIMM 288pins
$72.93
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$39.95