Results 1 to 7 of 7

Thread: DHCP

  1. #1
    Senior Member
    Join Date
    Jul 2011
    Posts
    110

    DHCP

    Im booting Knoppix 6.7 via pxe. Once Knoppix starts to load I get delay in DHCP during boot. The sending dhcp message appears for quiet some time. Then knoppix goes about its boot. The unit has an ip from the pxe process. So my question is, is this a knoppix delay or my pxe server? Any ideas?
    Thanks!

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW, no significant delay in normal (not pxe) use of dhcp.

  3. #3
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    So called normal use of DHCP within Knoppix doesnt begin until after X has started/loaded. Knoppix needs IP before X when pxe booting. I think it may be within minirt.gz the ini file itself. ?

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    I've contributed all I know for sure on this.
    But if pxe needs IP early, why isn't the server providing it already?

    Are you able to decode minirt.gz and read the init?

  5. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Yes, Ive just started to dig thru ini. I think DHCP server is confused by knoppix asking for an ip from the same mac addy that just requested ip?

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW,

    In 6.4.4 my LiveUSB took almost 120 seconds to get on-line initially.
    I finally disabled Network Manager and got down to about 55-or so seconds
    using a primitive /etc/rc.local routine to get my wifi going.

    In 6.7, there was no similar slow start to getting on-line in less than
    a minute and no need to circumvent Network Manager.

    Obviously either Knoppix or Network Manager must have changed between
    6.4.4 and 6.7. If you don't find the answer in minirt.gz, then you might
    see if there's some difference in NM that explains your situation.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Thanks for those ideas. I will post my findings. May take me a few days.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Intel Xeon E3-1270 v6 3.80GHz 4 Cores SR326 LGA1151 CPU Processor picture

Intel Xeon E3-1270 v6 3.80GHz 4 Cores SR326 LGA1151 CPU Processor

$46.00



AMD Ryzen 9 5950X 16-core 32-thread Desktop Processor picture

AMD Ryzen 9 5950X 16-core 32-thread Desktop Processor

$319.99



Intel Core i7-6700 3.40 GHz QUAD Core (4 Core) Desktop Processor 8MB LGA 1151 picture

Intel Core i7-6700 3.40 GHz QUAD Core (4 Core) Desktop Processor 8MB LGA 1151

$59.99



Intel Core i9-12900KF - 12th Gen Alder Lake 16-Core (8P+8E) 3.2GHz LGA CPU picture

Intel Core i9-12900KF - 12th Gen Alder Lake 16-Core (8P+8E) 3.2GHz LGA CPU

$262.99



Intel Core i7-12700KF Desktop Processor (12-Cores/20-Threads/LGA1700/Unlocked) picture

Intel Core i7-12700KF Desktop Processor (12-Cores/20-Threads/LGA1700/Unlocked)

$145.59



Intel Core i5-7600 3.8GHz Quad-Core Processor SR334 LGA1151 picture

Intel Core i5-7600 3.8GHz Quad-Core Processor SR334 LGA1151

$34.99



Intel Core i7-4790 3.60GHz Quad Core CPU Processor SR1QF LGA 1150 Socket picture

Intel Core i7-4790 3.60GHz Quad Core CPU Processor SR1QF LGA 1150 Socket

$32.99



AMD Ryzen 7 1700X 3.8GHz Eight Core (YD170XBCAEWOF) CPU Processor picture

AMD Ryzen 7 1700X 3.8GHz Eight Core (YD170XBCAEWOF) CPU Processor

$49.99



Intel Core i5-9500 3GHz Hexa Core 9MB 65W FCLGA1151 Processor SRF4B picture

Intel Core i5-9500 3GHz Hexa Core 9MB 65W FCLGA1151 Processor SRF4B

$66.49



Intel Xeon Platinum 8168 2.7GHz 24-Core FCLGA3647 Processor SR37J picture

Intel Xeon Platinum 8168 2.7GHz 24-Core FCLGA3647 Processor SR37J

$394.99