-
File copy gives error message "Success"
Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
Code:
/dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
Thanks in advance, Eric Spreen
-
Originally Posted by
erispre
Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
Code:
/dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
Thanks in advance, Eric Spreen
Two possibilities: 1) There's a problem with the old drive and/or filesystem; have you tried looking at it with GParted? It might tell you something useful. If it's NTFS, you can download a disk called "Hiten's BootCD", which will at least allow you to do a DOS chkdsk command.
2) There's something goofy with Pcman, and it can be done with a cp command in lxterm. You can Google for more on copying at the command line.
Hope that helps!
Krishna
-
Senior Member
registered user
@erispre
If you like to find out more about the filesystem's type on your USB HDD then you can use the blkid command.
Code:
sudo blkid /dev/sdf1
Do you use Knoppix 6.2.1? You could try GNU Midnight Commander mc instead of PCMan Filemanager.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
IBM x3250 M4 1U Server With Four 2.5" Drive Bays
$299.99
IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD)
$41.99
IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU
$229.99
IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD
$74.50
IBM System x3250 M1 1U Server Intel Pentium D @3.4 2GB RAM x2 250GB DRIVES NO OS
$50.00
IBM System x3650 M4 Dual Intel Xeon E5-2670 @2.60GHz 128GB RAM No HDD
$114.50
1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray
$318.00
IBM EXP3512 2U 12 Bay SAS 2 Storage Enclosure Expansion Unit JBOD SAN Shelf
$274.00
IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE
$159.00
IBM QRadar XX28-C 2U Server BOOTS 2x Xeon E5-2650 v3 2.3GHz 128GB RAM NO HDDs
$249.99