-
Usb as read-only
Hello,
my first post here
I would like to know if itīs possible to boot my knoppix (in a usb pen drive) as read-only. Once I finished my setup in persistence I value more my security than anything else, and so I donīt want something changed or somebody "hacking" my pen drive and changing my knoppix with malware, even not adding more to the persistent image but using my setup.
Thanks a lot.
-
Senior Member
registered user
Originally Posted by
jalb
Hello,
my first post here
I would like to know if itīs possible to boot my knoppix (in a usb pen drive) as read-only. Once I finished my setup in persistence I value more my security than anything else, and so I donīt want something changed or somebody "hacking" my pen drive and changing my knoppix with malware, even not adding more to the persistent image but using my setup.
Thanks a lot.
Greetings, jalb.
SDHCs have a little tab which allow you to select read-only; I don't know about pen drives.
That would make your LiveUSB more like a LiveDVD; however, you too won't be able to change it when it's read only.
You may want to look into the efficacy of using encryption as your defense against hacking & malware.
I think that's the standard approach to the problem.
Also, you need say whether your persistence is in a separate partition or not.
-
Originally Posted by
utu
Greetings, jalb.
SDHCs have a little tab which allow you to select read-only; I don't know about pen drives.
That would make your LiveUSB more like a LiveDVD; however, you too won't be able to change it when it's read only.
You may want to look into the efficacy of using encryption as your defense against hacking & malware.
I think that's the standard approach to the problem.
Also, you need say whether your persistence is in a separate partition or not.
Thank you stu
Sorry, I donīt know what is SDHC.
The problem is not about encryption only (thatīs not my problem, I always like to use encryption) but malware and destroying all my persistent image.
Thatīs why when I finished the settings in my persistent image I would like to keep it "safer".
If I choose a different partition the problem is still the same, because when I am using knoppix (and itīs not a safe s.o. avoiding new updates, etc) someone could get access and change everything.
Thanks!
-
Senior Member
registered user
Greetings again, jalb.
I sympathize with your concerns, but I think you can have it your way
if you put up with a little inconvenience here and there.
Persistence has to be read/write when it's updated.
If you have persistence on a separate partition, you can probably
move it back and forth between r/o & r/w. That's being awfully cautious
if that partition is alread encrypted.
If your use Knoppix as a Frugal install or a LiveUSB, the master KNOPPIX
file is in a compacted form that can be self-checked very easily to see if
you or anyone else has changed it. There is rarely any sense in doing
a 'hard disk install of Knoppix', you will learn to hate that.
An SDHC is a SecureDigital memory card, HC perhaps meaning High(er)
Capacity; higher than just SD, that is. Developed for digital cameras
and printers, some PCs also have an SD/SDHC adapter connected to the USB bus.
SDHCs cost less than 1$ per Gb these days in sizes appropriate to
LiveUSB usage. If you have a USB port, but not an SD/SDHX slot, then
Sony and others make an inexpensive USB-to-SD/SDHC adapter for ~$20.
-
Thatīs great stu!
But how can I move persistence to a different partition and make it work or telling knoppix where to boot?, do you mean to some hard disk inside the computer and then changing some route and making this partition read-only?. Do you think knoppix will work with encrypted read-only persistence?. I only use knoppix as live usb, never as a hard disk install.
If I use persistence normally (read/write) then itīs always changing stu, it would be hard to check it every day.
I understand about SDHC now
Thanks a lot.
-
Senior Member
registered user
Originally Posted by
jalb
how can I move persistence to a different partition and make it work or telling knoppix where to boot?
As you set out to make your Knoppix LiveUSB, you have choices along the way. One choice is to have persistence on a separate (reiserfs)
partition; another choice is whether to encrypt or not. Once you have your LiveUSB it's up to you to rummage around and change things.
Maybe you can make the persistence file read-only. Your persistence will not change until you set it back to read-write. This is up to you.
Take some chances, try things out. You can always start over if something goes wrong. Cheers.
-
Once I finished with all my setup (as I am using my knoppix with persistance now), how can I move it?. Can I change now the "normal" persistence file to read-only and it will work as usual?.
Thanks again stu.
---- Full quote deleted
wps
Last edited by Werner P. Schulz; 01-18-2015 at 09:50 PM.
-
Senior Member
registered user
Originally Posted by
jalb
Can I change now the "normal" persistence file to read-only and it will work as usual?.
I would expect if you make persistence read-only then it won't collect any changes until you reset it to read-write.
Isn't that what you would expect? And why don't you just try it and find out?
-
Yes, I tried when I fninshed writing my answer but knoppix didn't let me to change the pernissions of the persistent image (root console).
Thank you anyway.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell R730 w/ 2x E5-2650v3 10c, 192GB (12x16GB) RAM, H730 Mini, 2x 750W PSU
$499.99
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$299.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell PowerEdge R720xd Dual Intel Xeon E5-2660 v2 @2.20GHz 128GB RAM No HDD H710P
$249.99
Dell PowerEdge R830 Server 2x Xeon E5-4660 v4 2.20GHz H330 RAID X540 no mem/hd
$299.97
HP ProLiant ML350 Gen 9 Server 64GB RAM 2.4GHz Xeon 12-Core E5-2667 v3
$399.99