-
How to install OS
Sorry if this is a highly simple question, but I'm missing something.
I've got a scsi drive, and I've been able to load it, partition it, and format it. Currently it's
/dev/sda1 Ext2 45 MB
/dev/sda2 Linux Swap 450 MB
/dev/sda3 ReiserFS 25Gig
/dev/sda4 ReiserFS 48Gig
I figured I could use
/sda1 for /boot
/sda2 for swap
/sda3 for /
/sda4 for /var
How do I mount these correct, and install the OS to the hard disk?
Sorry if this answered in another post, but I can't find it.
If it is easy as kfx-hdinstall no need to reply.
Sorry been a long day.
-
Senior Member
registered user
Re: How to install OS
--I have no experience with the new installer (it's in /usr/sbin I think) but have some advice for your partition scheme.
--You can cut down sda1 to as little as 8MB for /boot unless you get really exotic with testing different kernels; even then 16MB should be plenty.
--You may also want to go the whole route and have partitions for /home (4Gig?) and /usr (8-10Gig?); then / could be something like 500MB.
--That's a whole lotta /var; you going to be doing a lot of webserving or making a dedicated-log server?
Originally Posted by
veitcha
Sorry if this is a highly simple question, but I'm missing something.
I've got a scsi drive, and I've been able to load it, partition it, and format it. Currently it's
/dev/sda1 Ext2 45 MB
/dev/sda2 Linux Swap 450 MB
/dev/sda3 ReiserFS 25Gig
/dev/sda4 ReiserFS 48Gig
I figured I could use
/sda1 for /boot
/sda2 for swap
/sda3 for /
/sda4 for /var
How do I mount these correct, and install the OS to the hard disk?
Sorry if this answered in another post, but I can't find it.
If it is easy as kfx-hdinstall no need to reply.
Sorry been a long day.
-
Senior Member
registered user
If it is easy as kfx-hdinstall no need to reply.
knx-hdinstall would be better
If you have the 7-26-03 or newer knoppix you might want to try the new "knoppix-installer".They are both included on the cd.On 7-26 (for sure) or newer to get root just say su.On older ones it's sudo su.I dont think your going to be installing on 4 partitions with the included installers.You might want to try hacking the installer and running it from the ramdrive or something but stock either one will just let you use a / and a swap.No need to change to /usr/local/bin or whatever just either boot "knoppix 2" or get root in a term/console and say the installer name.It's in your path.
So does the installer see your scsi drives?You can also do a manual install like mentioned in the faq located on your cdrom in /KNOPPIX.You should be able to install just to the root and use a swap then move some directories later after install like /var /home /whatever and link them.Tyr this from the DOCS link for example http://www.knoppix.net/docs/index.ph...PartitionHowTo
After install theres a good chance that kde will go german on you.Yhe easiest way to fix this and also free about 180meg will be (for english only in this example) to say apt-get remove kde-i18n* and then apt-get update and then apt-get install localepurge.After that just generate the locales for your language and type localepurge to see how much it freed.
-
Senior Member
registered user
and using knoppix-installer really makes things easier (at least for me)... Ensure your system is very well configured before you start the installation!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar
$304.35
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HYVE ZEUS V1 1U BAREBONE SERVER 2X10CORE E5-2680V2 2.8GHz 16GB RAM RISER NO RAIL
$180.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00