Boot off the Knoppix cd and launch a shell:Code:su mkdir /media/hdb6 mount -o rw /dev/hdb6 /media/hdb6 mcedit /media/hdb6/etc/fstab umount /media/hdb6
I was tweaking my Ubuntu fstab and I messed up.
I am using Knoppix 4.0.2 CD, in a terminal I entered this: Sudo mcedit /dev/hdb6/ect/fstab
I was able to edit my fstab but when I tried to save it I could not using F2 or the drop down menu.
What am I missing, does anyone know what I may be doing wrong ? This is my work computer and I would be forever grateful if someone could help me please......
sarah
Boot off the Knoppix cd and launch a shell:Code:su mkdir /media/hdb6 mount -o rw /dev/hdb6 /media/hdb6 mcedit /media/hdb6/etc/fstab umount /media/hdb6
I get this: can not create directory /media/hdb6, no such file or directoryCode:mkdir /media/hdb6
mount point /media/hdb6 does not existCode:mount -o rw /dev/hdb6 /media/hdb6
mount /dev/hdb6 already mounted or busyCode:mount /dev/hdb6
Did you boot off the Knoppix cd without clicking on any of the hard drive icons on the desktop?
Did you enter "su" as first command?
Is your existing Ubuntu install located on hdb6 = 6th partition on the secondary hard drive?
More precisely, the second logical drive on the extended partition. Even with 1 primary partition and one exteded partition containing as few as 2 logical drives, the first logical drive on the second (slave) disk on the first IDE controler would be hdb5 and the second logical drive would be hdb6.Originally Posted by ockham23
Now you have a good question there, I do not remember if I did or did not open up the hdb6 icon. Is this important ?Originally Posted by ockham23
I can answer yes to thisDid you enter "su" as first command?
yes again....Is your existing Ubuntu install located on hdb6 = 6th partition on the secondary hard drive?
I assumed you were somewhat familiar with linux commands. Here's an explanation:
su # become root
mkdir /media/hdb6 # create mount point "hdb6" inside directory "media"; assuming mount point doesn't exist already
mount -o rw /dev/hdb6 /media/hdb6 # mount hdb6 and make it writable; clicking on the desktop icon will mount the drive "read only"
mcedit /media/hdb6/etc/fstab # launch editor
umount /media/hdb6 # unmount partition when you're done
here is what I have, with Ubuntu on hdb6:Originally Posted by Harry Kuhman
/dev/hdb1 reiserfs 13.97 GB
/dev/hdb2 extended 19.75 GB
/dev/hdb5 linux swap 1.12 GB
/dev/hdb6 boot 18.63 GB
/dev/hdb3 reiserfs 19.53 GB
/dev/hdb4 reiserfs 21.27 GB
ok, let me try booting Knoppix CD again and I will make sure I have not clicked on the hdb6 icon, I'll be back.......Originally Posted by ockham23
regards,
sarah
ockham23,
thank you for the commands explaination, I am under average using linux commands, I have a personal file that I have saved my most important commands, I do a lot of copy and pasting. I wasted about a year with Linspire, (no commands needed) and have been using Ubuntu for about a year and love it.
But anyway, I booted Knoppix up again, made sure I did not open the hdb6 icon, then opened a terminal and tried your commands again but had the same results again as before.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar
$304.35
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 A Grade Processor
$5.09
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Rare WaterCooled HP Z800 Workstation Dual Xeon X5680 16GB RAM 120GB SSD Nvidia
$279.56