Hi all,
I am new to the forum and here because I have been working on the same project for the past three days. Just today I learned of Knoppix, but I have done alot of research and I feel I have a good grasp on it.
Here's my problem: I purchased an Intel 6300 wifi card (from eBay thinking that I could save some money). Ofcourse the card has a PCI ID that is one digit off from passing the laptop's whitelist. I do however have another laptop without a whitelist that the card is currently in. Knoppix 6.7.0 boots without errors and detects the card (wlan0, I can connect to my wireless network). Yet ethool (root shell) is giving me problems. The two commands I need to use, "ethtool -e wlan0" and "ethtool -E wlan0..." give the error "Cannot get EEPROM data: Operation not supported".
What should I do? Any help would be greatly appreciated. Thanks in advance.
HP Z420 Workstation Xeon E5-1650 v2 3.5ghz 6-Cores 64gb 256gb SSD 2TB Win10
$149.99
HP Z440 WORKSTATION XEON E5-1603V3 @ 2.80GHz, 16GB RAM 250 GB SSD Win 11
$119.99
INTEL XEON GOLD 6242 2.8 GHZ PROCESSOR | SRF8Y
$499.99
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$124.67
Intel Xeon E5-2697 V4 2.30 GHz 18C 2011-3 2400MHz 45MB 145W SR2JV CPU Processor
$49.99
SR1XD INTEL XEON 18 CORE PROCESSOR E5-2699V3 2.30GHZ 45M 145W CM8064401739300
$44.90
Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5
$52.00
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 A Grade Processor
$5.27
SRF8T INTEL XEON GOLD 5218 2.30GHZ 16-CORE 22MB 125W CPU PROCESSOR
$297.00
HP Z420 Workstation Xeon E5-2690 v2 3ghz 10-Cores 32gb 240gb SSD 1TB Win10
$189.99