Why not read- and writable? I suppose you are using a "poor man's install.
First I boot knoppix as:
then I seeknoppix64 init 2 no3d fromhd="/dev/sdc5"
$ mount | grep mnt-system
/dev/sdc5 on /mnt-system type ext4 (rw,relatime,block_validity,delalloc,barrier,user_ xattr,acl)
$ blkid | grep sdc5
/dev/sdc5: LABEL="KNPX771" UUID="54e317fe-73cf-4b1c-8b1f-dfc9b708b68a" TYPE="ext2" PARTUUID="591ef660-03"
Why not read- and writable? I suppose you are using a "poor man's install.
OK, I (most probably wrongly) thought that partition used for a "poor man's install" would be read-only anyway
Say, you would like to define the regular user directory on the starting command prompt and you don't want anything to be ever written there
In fact, you would run knoppix without a hard drive at all and set up a user account after it started in case you would like to save anything. I would say a few files (access control + security) would be altered, just a few ... but the rest should be read-only
How do you do that?
Last edited by Albretch; 12-19-2016 at 08:03 PM.
In this case I wouldn't use a Live Linux as Knoppix with all his limitations. I would prefer for example Debian.
Amiga 4000TX computer motherboard
$2643.23
Mini External OLED AMIGA Gotek Floppy Drive Emulator For Amiga 500/500+/600/1200
$37.32
Amiga 500 Gotek Custom Mount USB Floppy Emulator - Complete Kit with Gotek
$65.00
TF1232: a 25MHz 68030 Amiga 1200 accelerator with 64MB RAM and FPU option
$138.11
13 Available Samsung SFD-321B Floppy Drive Modified for Commodore Amiga
$30.00
Amiga Workbench v1.3 Boot Disk + Extras A500 A2000 1.3 on DD 3.5" Floppy Disks
$14.99
Amiga OS Operating System v3.1 Install Disks for Commodore Amiga
$34.98
Commodore Amiga A3000 Computer - WORKING - New Battery - Great Condition
$2379.15
TF1260 including 68LC060 CPU, accelerator card for the Amiga 1200, 128MB Ram
$320.79
pi1541 Disk Emulator for Commodore -
$38.95