Are the machines' BIOS settings identical?
Hi,
In my office, I have got 2 identical PC (same brand, model, Hardware). I will called them PC1 and PC2.
PC1 have been installed with a fully working knoppix so I wanted to put the PC1 hard disk into PC2.
But when I swap PC1 Hard Disk to PC2, it will stop booting up after this message:
"Enabling DMA acceleration of XXXXXX"
I know that normal booting will follow by the line,
"Found Hardware profile at XXX"
"copy Hardware profile to XXX"
Can anyone tell me what is the problem around here? What can I do to solve this problem?
Thank you so much
ken39
Are the machines' BIOS settings identical?
Hi Siking,
Sorry for the late reply, been really busy this week.. ^^"
The BIOS setting is the quite identical between these 2 PCs, except for the different brand of HDD, everything is the same.
However, I have managed to get this HDD to work when I put the HDD with the working Knoppix into another identical PC (PC3)....strange...I suspect there must be a hardware difference in PC2 and it is the cause of this problem to occur.
These 3 PC are almost identical in the sense that they are from a same brand and model and all are having integrated parts (except for HDD, CDROM-checked; is the same,RAM-checked; is the same), so this bypass I found actually did not address the problem completely. Nonetheless, they all working now, and I am grateful that they are. ^^=
Thanks again for reply my question, siKing! ^^
ken39
at the boot prompt type "knoppix nodma"
New Juniper MX204 Router MX204-HW-BASE Junos-64 Dual AC Power
$8750.00
Juniper SRX1500-SYS-JB-AC SRX1500 Services Gateway-Dual Power JPSU-400W-AC
$1784.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.18
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX2300-24P Poe+ Rack Mountable Ethernet Switch
$130.00
Juniper QFX5100-48T-AFO 48 100M/1G/10G Base-T 6 QSFP AFO
$485.00
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00