-
Configuring wireless network with data from Kismet
After a long battle, I seem to have gotten kismet to work. It is capturing packets right now from some unencrypted network. The purpose of this little endeavor of mine was to see if this wireless NIC functions properly, but I don't have a wireless network of my own to test it with. How to I configure my machine to use the network with the information the kismet provides?
I'm running knoppix 3.3 (no hard drive) with what lspci tells me is a wavelan prism2.5 or something to that effect. (It's a linksys wmp11, an older version.) It looks like knoppix loaded the orinoco drivers, and iwconfig shows the interface to be eth0.
Keep in mind that today has been my first adventure into wireless. Any help is appreciated.
-
Senior Member
registered user
Re: Configuring wireless network with data from Kismet
Originally Posted by
berto
After a long battle, I seem to have gotten kismet to work. It is capturing packets right now from some unencrypted network. The purpose of this little endeavor of mine was to see if this wireless NIC functions properly, but I don't have a wireless network of my own to test it with. How to I configure my machine to use the network with the information the kismet provides?
I'm running knoppix 3.3 (no hard drive) with what lspci tells me is a wavelan prism2.5 or something to that effect. (It's a linksys wmp11, an older version.) It looks like knoppix loaded the orinoco drivers, and iwconfig shows the interface to be eth0.
Keep in mind that today has been my first adventure into wireless. Any help is appreciated.
If you want to crack someones network this is not the place to be asking for advice. To test your wireless card you should find someone with a network that will allow you to connect. And depending on the network you try to connect too you could find the police knocking on your door. Any further questions of this nature will be deleted and any responses telling you how to do it will be. I had thought of deleting this one but I figured a reply to your query would be better.
Similar Threads
-
By squard in forum Networking
Replies: 0
Last Post: 03-20-2005, 10:27 PM
-
By ramesh in forum Networking
Replies: 4
Last Post: 01-26-2005, 02:41 PM
-
By JJ in forum Networking
Replies: 0
Last Post: 03-10-2004, 10:56 AM
-
By johnsandidge in forum Networking
Replies: 2
Last Post: 01-06-2004, 04:02 PM
-
By Rggoalie3 in forum General Support
Replies: 4
Last Post: 12-30-2003, 10:55 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Yottamaster 4Bay RAID RGB Hard Drive Enclosure Type B Fr 2.5'' 3.5" SATA HDD SSD
$149.99