Best copy and paste the code 1:1 from the homepage. This way, you are getting the correct characters.
I am a newbie to Linux, I'm using Mepis 6.5, and I want to install klik-the commands given are as follows:
wget klik.atekon.de/client/install -0 [sh
What is the symbol before sh, I am using the key to the right of the p in lower case,the symbol looks like a vertical line in the install instructions, but my keyboard doesn't have that key so I thought it might be the one I'm using. Any help would be greatfully received. Thanks van
Best copy and paste the code 1:1 from the homepage. This way, you are getting the correct characters.
The symbol you need is the | (pipe symbol)
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid
$49.99
Dell R630 8SFF 2.6Ghz 28-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$490.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00