Try manually getting one via dhcp
ifconfig ath0 up
pump -i ath0
I have a dell laptop with Knoppix 3.9 installed. I bought a new Proxim gold card that uses Atheros (madwifi) drivers. It works ok on my network with my windows setup but I am having an issue with Knoppix 3.9. Knoppix ses the card and with IWCONFIG and KWIFIMANAGER I can see my network and even other networks in my area but I am not getting an IP address. I made sure that Encription and Mac address filtering were turned off and I still can not get IP. Again it works ok with my windows setup but not knoppix.
My Knoppix setup does work with my linksys card but I really wanted to use the proxim because of the external antenna.
Any ideas of what I am doing wrong?
Try manually getting one via dhcp
ifconfig ath0 up
pump -i ath0
I did not know that pump command but it worked!!!Originally Posted by foamrotreturns
Thanks big time!!
There are too many dhcp commands to remember these days and it seems every distro uses a different one.
for future reference, and if that one doesn't work for you (you being any person reading this thread) you might try these as well:
dhclient
dhcpcd
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98