did you get it working. have same problem with aspire 1414 wlmi.
black screen, no kde.
Hello guys
I have got an Acer TravelMate 4000, which normally runs under WindowsXP Pro (not for long);
I've tried so far Knoppix 3.7, which runs smoothly and without a glitch, apart from the WiFi drivers, which were not supported yet.
I then downloaded Knoppix version 3.8 (CeBit) and the latest Knoppix 3.8.1;
When I try to boot up, the system locks up at the black screen, before loading XWindow, in fact it says something like:
"After this the system will be rebooted", but then carries on until nothing happen and I get the simple black screen with the shell, no graphics at all...
The only way I can reboot is just type in: reboot;
How come? Any of you has some idea about this problem?
This just happen, on my laptop, because I have tried the cd on my home pc, and University pc, and it works just fine...
I done a MD5 checksum and gives me a correct answer!
Thanks in advance.
Urb85
did you get it working. have same problem with aspire 1414 wlmi.
black screen, no kde.
Same here, Acer Aspire 1400LC P4 with Radeon Mobility M6 (which has a bug in 3D acc). You can use Alt-Backspace to get out of the Xserver, use "init 2" to go to text mode and have a look at /var/log/XFree somthing.log
I get some warnings at the end of the log. Changed some settings in XFreeConfig-4 and even used the default Config, but to no avail.
Older version (V.forgot)of Knoppix work fine, apart from wireless drivers.help...
Vielleicht kann ich euch helfen!
Ich habe auch einen neuen Acer, und zwar TravelMate 4150 mit Intel 915 GM mit 3D Intel Graphics Media Accelerator 900.
Der Bildschirm beim starten von X wurde auch schwarz.
Mit Knoppix 4.0 DVD versuchte ich es schließlich mit folgendem Bootparameter:
knoppix vga=normal
=> erfolgreich
Bei der Ubuntu Live Version 4.10 hatte ich Erfolg mit dem Booteintrag:
expert
Wärend des Bootvorganges wird die Grafikkarte autodetected:
using XFree86(vesa)Server
Using Modes "1024x768"
Bei der Installation auf Festplatte bin ich momentan dabei. Da könnt Ihr mir ja die Daumen drücken, daß dann auch der Grafikbildschirm läuft. Aber ich habe schon gelesen, daß man in der "menu.lst" von grub dem Kernel auch "vga=normal" hinzufügen muß.
Viel Glück
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
$209.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00