Hello.
I found it self.
I use the network drivers for "tulip".
Is it correct that i have to use the console commands "pon dsl-provider" to connect and "poff" to disconnect?
I used this command under the root-console.
Alias
Hello.
Im from germany and i hope that my english is good enough.
If i bootet with knoppix and i will configure my dsl connect, i have the problem that my network card is not there.
I use an older PCI Adapter from CNET, Model CN935E. The chip on this card is from
"digital" and type is "21041-PB".
What have i to do that knoppix identified this adapter?
Thanks
Alias
Hello.
I found it self.
I use the network drivers for "tulip".
Is it correct that i have to use the console commands "pon dsl-provider" to connect and "poff" to disconnect?
I used this command under the root-console.
Alias
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$1979.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$294.00
Dell PowerEdge M620 Blade Server
$39.99