-
Dual HD install problems
I am running Windows 2k prof on hda1
I hd/installed on /hdb1 knoppix.
However, I cannot get the computer to boot from hdb1. Not even
when changing boot drive from hdd-0 to hdd-1 in BIOS.
And as far as I know installing lilo or similar boot manager on
hda1 would make windows2k not work.
At the moment I am booting from floppy.
Any suggestions on how to get my newfangled knoppix box up without
the floppy disk?
-
Re: Dual HD install problems
Salve FIknoppiXr
>I am running Windows 2k prof on hda1
>I hd/installed on /hdb1 knoppix.
>However, I cannot get the computer to boot from hdb1. Not even
>when changing boot drive from hdd-0 to hdd-1 in BIOS.
>
>And as far as I know installing lilo or similar boot manager on
>hda1 would make windows2k not work.
First stepp to learn Lilo, read the lilo-mini-Howto
Second, install lilo in MBR of hdb1, than you can choose OS by BIOS boot settings
Third, install lilo in MBR of hda1 with the right configuration for windows2k.
Because I use only GNU/Linux I cant help you with booting M$.
But I can advice to read:
http://en.tldp.org/HOWTO/mini/LILO.html
rob
-
Booting 2nd. disk drive
After you boot from the floppy drive, log in as root, and edit the file "/etc/lilo.conf".
The only thing you have to change is the line
boot=/dev/hdc
to
boot=/dev/hda
Save the file
Run "lilo" from the command line
Reboot and the Lilo window will be waiting for you to choose your operating system
-
Ok, id edited the /etc/lilo.conf, from line that said
'boot=hdb' to 'boot=hdb1',
then typed 'lilo', then stuff happened, and was successful.
Upon restart I went to BIOS and made hdd-1 the boot disk,
what happened was
'L 99 99 99 99 99 99 99 ...' with 99 spewing on the screen faster than
donuts off the coffee tables.
damn
Cannot connect to internet either.. cable modem... interface file contains
already
auto lo eth0
iface lo inet dhcp
auto eth0
iface lo inet dhcp
//I edited the latter ones in as someone suggested this would fix the problems...
I dont even know where to start...
-
Senior Member
registered user
The boot should be boot=/dev/hdb and the first iface line should be iface lo inet loopback and the second iface eth0 inet dhcp and you do not need the second auto eth0 you have already done that above.
Edit: Also you will have to re-start the network /etc/init.d/networking restart to have the changes to the network settings applied.
-
Great! I actually tried different variations last night, but it must have
been that restarting of the network services that caused everything to
fail - gotta try it
So where do I write an FAQ about it?
-
Senior Member
registered user
You can use the knoppix wiki instructions are in the links at the bottom of the page.
Similar Threads
-
By pakux in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 12-13-2004, 03:09 PM
-
By \/\/inblowz in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 12-06-2004, 06:36 PM
-
By nicorelli in forum Hardware & Booting
Replies: 0
Last Post: 08-05-2004, 09:12 AM
-
By Paradox in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 01-07-2004, 01:58 AM
-
By NYLinuxLover in forum Hardware & Booting
Replies: 1
Last Post: 02-12-2003, 06:36 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper Networks SRX4100-SYS-JB-AC SRX4100 Services Gateway 8x1GbE/10GbE AC
$3799.99
Cisco ASA5525-FTD-K9 Security Appliance with FirePower Services
$1000.00
Cisco Meraki MX64-HW Cloud Managed Security Appliance w/AC Adapter Unclaimed
$74.99
Zyxel ZyWALL USG50 Unified Security Gateway Firewall
$35.00
OPNsense six-port Gigabit router/firewall on Lanner FW-7535 hardware
$69.00
Fortinet Fortigate-50E FG-50E Network Security Firewall Initialized Power Cable
$43.19
PFSense F80 Firewall | Atom C2358 CPU | 4 Gigabit Ports | 2GB RAM | FANLESS
$75.00
Fortinet Fortiwifi 60D FG-60D Security Appliance Firewall / VPN w/ AC Adapter
$34.97
Pulse Secure PSA3000 Security Firewall Appliance SSL VPN
$69.99
Cisco ASA5505-SEC-BUN-K9 Firewall Security+ 25 VPN Peers 512MB ASA9.24 /W Power
$39.99