-
knoppix 3.4 ---> great job
Until now no linux distrobution has detected my sound card correctly. Now it has all changed, I can hear music in linux. The thing is that I don't know if it's because of knoppix hardware detection tools (which didn't work in version 3.3) or the new kernel (>2.6.x).
Actually my question divides into 2 questions:
1. Does anyone know if any changes to the detection tools have been made? or maybe it is the new kernel (sound card: SiS 701 which brings me to my next question:
2. I want to install it. I currently have on my computer winxp & SuSE linux 9.0 with kernel 2.4.22, and my sound card does not work. I want to delete SuSE and install knoppix 2.6.6 to my HD, without damaging my winxp. Is there any guide which walks me through (in detail) all the install procedure, and all the things around it (e.g. bootloader)?
thanks ...
-
ok, I see nobody cares about me , but I have installed knoppix using this guide
http://godot.studentenweb.org/debian/index.cgi. After rebooting I get
a messege similar to this (can't copy-paste you know):
Code:
Ext3-fs: mounted filesystem with ordered data mode
attemt to access beyond end of device
hda7: rw=0, want=7864344, limit:6843627
Ext3-fs error (device hda7): exts_get_inode_loc: unable to read
inode block - inode: 480961, block=98042
mount: fs type devfs not supported by kernel
.
.
.
Init: no initab file found
Init: can't open(/etc/ioctl.save, O_WRONLY): I/O error
Enter runlevel: attmept to access beyond end of device
.
.
.
anyone knows what seems to be the problem? I'm a complete noob, and really clueless
about these messeges, however, when booting with the cd I see that in hda7 there
is no /etc folder at all, but how could it happen?
thank you
-
Junior Member
registered user
I agree they did a great job with 3.4! I'm writing because I wanted to tell you I do care about you! But I can't answer your questions, sorry... Maybe my bumping this will help!
-
Originally Posted by
linda
I'm writing because I wanted to tell you I do care about you!
thanks alot man. actually I got it to work now. for some reason the partition tool in
the installer didn't work as it should and it completly ruined my partitions which also
effected linux . I couldn't fix it using the cd with qparted or cfdisk, they both compained
there's a problem and exited. luckily I still have winxp, and with some partition tool I
re-partitioned the HD, booted again with knoppix and installed successfully.
now I have some questions in the post-install area:
a) how can I get the network card to load at startup, like when running from the CD?
b) how do I use another partition for /home?
Similar Threads
-
By krolrules in forum General Support
Replies: 2
Last Post: 04-12-2005, 12:17 PM
-
By knoppixrox in forum Laptops
Replies: 0
Last Post: 09-22-2004, 01:58 PM
-
By mharazin78 in forum The Lounge
Replies: 9
Last Post: 05-13-2004, 04:51 AM
-
By monkymind in forum The Lounge
Replies: 1
Last Post: 10-30-2003, 08:41 AM
-
By paulnasca in forum The Lounge
Replies: 9
Last Post: 09-23-2003, 10:49 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$157.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
Seagate Exos X22 ST20000NM004E 20TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$268.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.49
WD HDD Ultrastar DC HC520 HUH721212AL4205 12TB 3.5" SAS Server Hard Disk Drive
$45.30
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.49