Use "vga=normal" as cheatcode - or include it in syslinux.cfg
Hello,
I installed Knoppix on HDD with the debian-begginer option (autodetect devices on boot) and have a small problem to fix:
at boot time, initrd changes the VGA screen from the 80x25 to one with more columns and lines. Unfortunately, my laptop does not shows all the text now, there are columns and lines outside the screen area. This really bothers me, as I am the console guy...
I did a bit of digging through the FAQ but could not find any of the boot.img, syslinux.cfg, etc.
Is there a way to fix it?
Thanks
a.
Use "vga=normal" as cheatcode - or include it in syslinux.cfg
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00