I believe the DWL-650 is a ACX-100 based Wifi card.
So already tried this ? :
http://www.houseofcraig.net/acx100_howto.php#app_b
I see knoppix 3.4 still uses Orinoco driver for my D-link DWL-650 (prism2) card. This is not the optimal driver, but hostap or wlanng should be used instead. The reasons are the gain of stability and features (master mode).
To fix this i had to:
That is, toughly replace "orinoco" for "hostap".Code:cd /etc/pcmcia for i in config*; do cat $i | sed 's/orinoco/hostap/g' > kk ; mv -f kk $i; done /etc/init.d/pcmcia restart
Is there a better way of enabling hostap driver? Is this already fixed en later releases?
I believe the DWL-650 is a ACX-100 based Wifi card.
So already tried this ? :
http://www.houseofcraig.net/acx100_howto.php#app_b
By the way, DWL-650+ (mind the '+' sign) is the acx100 based.Originally Posted by ktheking
I own both cards, for the second card i must download and compile driver apart (thanks for the link anyway )
I was going to suggest also suppor for acx100 driver, but someone has started a thread on that issue already.
New Juniper MX204 Router MX204-HW-BASE Junos-64 Dual AC Power
$8750.00
Juniper SRX1500-SYS-JB-AC SRX1500 Services Gateway-Dual Power JPSU-400W-AC
$1784.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.18
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper Networks EX3400-48T 48 Port Gigabit 4 SFP 1/10G Network Switch #73
$239.99
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00