Add those module names to /etc/modules (or /etc/modules-KERNEL-VERSION if it exists). These modules are loaded at each boot.
Hello,
some weeks ago I had installed Knoppix 3.3 on HDD and everything works fine. But at that time, the USB support was switched off in the BIOS. Thus, there are now as a result no USB modules available in my Knoppix HDD installation (the output of "dmesg" doesn't show anything about a USB driver).
How can I add the needed USB modules (probably usbcore, usb-uhci and usb-storage) to my system?
When I boot Knoppix from CD, my USB stick is at least found within the "K Info Centre" and the vendor name / serial number shown there. Hence, the hardware seems to be working. Yet, I could't mount the USB stick so far as there seem to be some additional filesystem problems.
But what I actually want is to use the USB stick with my existing Knoppix 3.3 HDD installation. What shall I do???
Thanks in advance for your help!
Oli
Add those module names to /etc/modules (or /etc/modules-KERNEL-VERSION if it exists). These modules are loaded at each boot.
Hi Kelmo,
if this was so easy, I'd be glad. But it isn't!
I tried insmod usb*, but it didn't find the usb-storage module. Then I found it somewhere deep in the directory tree and installed it there manually. But when I try to mount my usb stick on sda1, I always get the error message: "not a valid block device". sda4 is my Iomega ZIP drive which works fine.
As I wrote, the situation is a little bit different when booting from CD (Knoppix 3.3 or 3.4ct): Then, the USB stick is recognized correctly (as shown with "dmesg"), but Knoppix installs four SCSI devices, named sda1, 2, 3, and 4. sda4 should be my Iomega ZIP drive. However, if you try to mount any of the sda1...4 devices, you'll get the error message "filesystem could not be detected".
Please help!
Olivier
I believe that it is a problem with the partition table of the device that you are trying to mount. The mere fact that the filesystem is the trouble means that the device is being detected properly.
I cannot give any more info, because I am not 100% certain on how to correct this, but it is a problem with the partition table.
I have read other threads in this forum on the same topic.
60s 70s 80s CLASSIC ROCK Music Collection - Over 1500 songs - Vintage, Lot
$33.99
Vintage Albert Specialty Co Lighted Contact Printer Replacement Part
$20.00
IBM Model M - 1391401 - 01MAR89 - Vintage Mechanical Keyboard - READ DESCRIPTION
$49.99
Vintage Brother CT-1050 Monitor Display 12" Word Processor (Turns On, Read)
$60.00
Vintage Compaq 141649-004 2 Button PS/2 Gray Mouse M-S34 - FAST SHIPPING - NEW
$8.99
Vintage Microsoft Windows 2000 Server Beta 3, 1999 TechNet
$25.00
NEW Manufacture OLD STYLE Oval 3 Prong Power Cord HP style 125V 7A 875W Vintage
$39.95
Vintage Microsoft Small Business Server 4.0 Service Pack CDs, 1999 TechNet
$20.00
Vintage Commodore Amiga Trumpcard Pro Controller Card
$99.99
Vintage Industrial 1984 Micro Systems - Z80 CPX-BMX Board 128K
$115.00