can you be more specific about setting up hdd (after knoppix-installer + setting up mfs) openmosixviewer
what is "setting up mfs ? mean
thanks
peter
I just recently tried to setup several nodes with clusterKNOPPIX 3.6 CDs and the cheatcode "knoppix toram." If I boot normally from CD (no cheats) or from hdd (after knoppix-installer + setting up mfs) openmosixviewer can see all the nodes and all the migration. If I use toram, I only see the local node, sometimes I see a remote node in red.... Is there a fix for this?
TIA,
AJG
can you be more specific about setting up hdd (after knoppix-installer + setting up mfs) openmosixviewer
what is "setting up mfs ? mean
thanks
peter
Take a look at:
http://www.knoppix.net/forum/viewtop...r+mfs&start=50
Regards,
AJG
for plener: first u make sure ur master node is up and can access the network, then u set up the knoppix openmosix terminal server as stated, then u make sure your client node's network card support pxe boot (u need to enable network boot in your BIOS), then just start ur client node.
and to: el_supremo, A. Jorge Garcia and wangji
I finally found you guys that used quantian successfully, do u mind give me a little hint about my problem?
I may start quantian in my vmware (boot:migshm), and set up the openmosix terminal server successfully, and then my node and PXE boot from it, my openmosixview also found 2 cpus now, however, while i just randomly open some applications to see if the load is being migrated and the other cpu is not showing any load at all.
and I found this error on the other node saying that:
openMosix: Auto-migration of local-processes from this node re-enabled
openMosix: guest-processes now accepted again
MFS already mounted!
omdiscd[2774]: bind failed on interface 0: Address already in use
omdiscd[2774]: Unable to initialize network. Exiting.
any comments are greatly appreciated
I've never gotten PXE to wprk right in my lab.
I recommend all nodes boot a CD or all nodes be hdinstalled. I've recently had more success with a CD only distro (no hdinstall option) that runs on a 200MB CD and, as a rexult, boots about as fast as hdinstall. This distro in BCCD (Bootable Cluster CD) which also uses openMOSIX. Maybe you sould try it!
Regards,
AJG
Thx Jorge:
The reason I used quantian PXE boot my slave nodes is that my slaves don't have DVD ROM, but anyways, I did progress a bit and see the load of the cpu shifting back and forth to different nodes using the IBM test script testapp.c here (thx to a friend who mentioned this in the early post)
http://www-128.ibm.com/developerwork...knop.html#main
I did try BCCD, and it appears not to support my netword card, so...what a pity.
It's real hard for the openmosix to utilize unless u use some big software such as blender or stuff...so openmosix is really got to develop much further.
Keep in touch, thx!
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails
$721.05
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 2x10G+2x1G NIC 2x750W PSU
$399.04
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 A Grade Processor
$5.09
Intel Xeon E5-2699v4 SR2JS 2.2GHz 22-Core 55MB 145W Server Processor CPU
$144.95
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Rare WaterCooled HP Z800 Workstation Dual Xeon X5680 16GB RAM 120GB SSD Nvidia
$279.56