-
Cannot mount windows partitions
Just run Knoppix for the first time, and I'm new to Linux. I cannot mount my windows drives. I get an error when mounting. Here's the details:
more /etc/fstab
Code:
proc /proc proc defaults 0 0
pts /dev/pts devpts mode=0622 0 0
/dev/fd0 /mnt/auto/floppy auto user,noauto,exec,umask=000 0 0
/dev/cdrom /mnt/auto/cdrom auto user,noauto,exec,ro 0 0
# Added by KNOPPIX
/dev/hdc /mnt/hdc auto noauto,users,exec 0 0
sudo fdisk -l
Code:
Disk /dev/hdc: 41.1 GB, 41174138880 bytes
255 heads, 63 sectors/track, 5005 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdc1 * 1 1912 15358108+ 7 HPFS/NTFS
/dev/hdc2 1913 10006 65015055 f W95 Ext'd (LBA)
/dev/hdc5 1913 3187 10241406 c W95 FAT32 (LBA)
/dev/hdc6 3188 3824 5116671 b W95 FAT32
sudo mount -t ntfs /dev/hdc1 /mnt/hdc1
Code:
mount: wrong fs type, bad option, bad superblock on /dev/hdc1,
or too many mounted file systems
(could this be the IDE device where you in fact use
ide-scsi so that sr0 or sda or so is needed?)
Thanks!
-
ls -la /mnt/hdc*
Code:
/mnt/hdc:
total 2
drwxr-xr-x 2 root root 1024 Feb 24 21:01 .
drwxr-xr-x 8 root root 1024 Feb 24 21:09 ..
/mnt/hdc1:
total 2
drwxr-xr-x 2 root root 1024 Feb 24 21:07 .
drwxr-xr-x 8 root root 1024 Feb 24 21:09 ..
/mnt/hdc5:
total 2
drwxr-xr-x 2 root root 1024 Feb 24 21:09 .
drwxr-xr-x 8 root root 1024 Feb 24 21:09 ..
-
OK I am back. Just downloaded Knoppix 3.4 and have same problems mounting as before. Now have a new PC except for the hard drive.
more /etc/fstab
/proc /proc proc defaults 0 0
/sys /sys sysfs noauto 0 0
/dev/pts /dev/pts devpts mode=0622 0 0
/dev/fd0 /mnt/auto/floppy auto user,noauto,exec,umask=000 0 0
/dev/cdrom /mnt/auto/cdrom auto user,noauto,exec,ro 0 0
# Added by KNOPPIX
/dev/sda /mnt/sda auto noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hda /mnt/hda auto noauto,users,exec 0 0
fdisk -l
Disk /dev/hda: 41.1 GB, 41174138880 bytes
255 heads, 63 sectors/track, 5005 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 1912 15358108+ 7 HPFS/NTFS
/dev/hda2 1913 10006 65015055 f W95 Ext'd (LBA)
/dev/hda5 1913 3187 10241406 c W95 FAT32 (LBA)
/dev/hda6 3188 3824 5116671 b W95 FAT32
mount /dev/hda1 /mnt/hda1
/dev/hda1: Input/output error
mount: you must specify the filesystem type
mount -ntfs /dev/hda1 /mnt/hda1
mount: fs type fs not supported by kernel
-
Just tried Knoppix 3.4 with the 2.6 kernel, and the all my hard disk partitions appear on the desktop, and can be read without issue.
Any reason why 2.6 kernel would work, and 2.4 not?
-
Senior Member
registered user
This lines are humbug:
# Added by KNOPPIX
/dev/hda /mnt/hda auto noauto,users,exec 0 0
instead:
Code:
# Added by user :)
/dev/hda1 /mnt/hda1 ntfs noauto,users,exec 0 0
/dev/hda5 /mnt/hda5 vfat noauto,users,exec 0 0
/dev/hda6 /mnt/hda6 vfat noauto,users,exec 0 0
Perhaps your 2.4 kernel was build without ntfs-support, and the other problems depended on the wrong entries in /etc/fstab?
Similar Threads
-
By muczy in forum General Support
Replies: 1
Last Post: 08-16-2004, 11:50 AM
-
By Thaidog in forum General Support
Replies: 13
Last Post: 04-11-2004, 02:23 PM
-
By jackren in forum Hdd Install / Debian / Apt
Replies: 6
Last Post: 03-24-2004, 02:03 PM
-
By sb73542 in forum General Support
Replies: 6
Last Post: 02-13-2004, 01:32 AM
-
By henrique in forum Customising & Remastering
Replies: 0
Last Post: 09-24-2003, 12:05 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
CSE-118 Supermicro 1U 3x GPU Server 2.6Ghz 20-C 128GB CX353A 2x1600W PSU Rails
$454.03
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 2x10G+2x1G NIC 2x750W PSU
$399.04
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 A Grade Processor
$5.09
Rare WaterCooled HP Z800 Workstation Dual Xeon X5680 16GB RAM 120GB SSD Nvidia
$279.56
Dell Precision T5600/t5610 Xeon E5-2670 2.6Ghz 16GB DDR3 RAM NO HDD Nvidia
$90.00