What's the output of ifconfig -a ?
Hi everybody,
knoppix dosn't install my realtek rtl-8169 network interface. Everything seems to be ok:
- lsmod shows the module r8169 (bound to nothing!)
- lspci shows the card
- manual configuration by netcardconfig seems to work, but i can only ping the local interface
The interface is in the mainboard (gigabyte k8n) integrateted.
Thanks for the help
Henning
What's the output of ifconfig -a ?
ifconfig shows the lo and the eth0 interface, both up. the eth0 is the realtek card with the right IP address and MAC number (i'm running windows xp on the same computer with intranet working). the right chip is regognized (controlled by dmesg). My DHCP server works quite fine with all others computer, via knoppix or windows xp or suse linux.
bye henning
I seem to recall some reatek chipset needing the "noapic" cheatcode to work. OTOH, someone else seems to have had problems with that gigabit chipset... Try booting with "knoppix noapic" and see if it helps.
thx to baldyeti! the cheat code worked!
henning
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00