Sounds like you need to use a cheat code to pass the proper parameters to your hardware. Tell us about your video card and monitor. You can find the cheat codes in the Docs.
For some reason, when I boot up knoppix, It does all of the stuff it needs to do, but it doesnt take me to the desktop..Just a full screen terminal..
Can anyone help?
Sounds like you need to use a cheat code to pass the proper parameters to your hardware. Tell us about your video card and monitor. You can find the cheat codes in the Docs.
Well, I have a laptop with a 15.4 inch screen.
The video card...
A radeon IGP 354M w/64 mb of memory
Also..If it helps, I was going over to my mom's (different IP or something?(my parents are divorced)), and I was in the terminal, and typed "shutdown now"..it said "sending all proceses the TERM signal", then froze up, so I had to use a hard shutdown...If that makes a difference..It was working before when I was @ my dad's..
Can anyone help?
I presumed you were running the live cd. If so it shouldn't make any difference how it shut down. If running from hdd install then it *may* matter.
When you boot the disc on subsequent attempts are you using any cheat codes? Perhaps try:
knoppix xmodule=radeon
Or perhaps another cheat code or combination of codes. They can be found here: http://www.knoppix.net/docs/index.php/CheatCodes
Usually it should provide an error message when it fails to start X (x-windows). Post the error please.
I'm not running from the CD. I'm running from the HD. It has all the hardware info saved on it. So, I'm not sure why it wouldnt work, because It was working, like, ten minutes before..
I also have no clie how to enter the cheat codes..=/
Tell me, do you have a user login at the full screen terminal you get after booting?
If you do, you can login, and type the command:
or even:Code:startx
Then, you should have a desktop, unless something has gone terribly wrong with your installation.Code:X :0.0 | xterm -display :0.0 -e startkde
Also, you may wan't to post any errors you get at bootime (if any), and, or, any errors while trying to start X (only if you have a login of course).
The only error I get with the full-screen terminal (or what I think is an error), is, unstable tty..But that's it..
EDIT: Thanks! Startx works! Is there a way to get that to boot up automatially?
Run ksysv as root, and you can edit your init (the programs which are started automaticly at bootime). It should include the program kdm.Originally Posted by Kevin
Here is where kdm appears on mine, you can edit your's correspondingly (simply drag and drop, programs are to your left):
Runlevel 2 (kdm should be underneath rmnologin)
Runlevel 3 (kdm should be underneath rmnologin)
Runlevel 4 (kdm should be underneath rmnologin)
Runlevel 5 (kdm should be underneath rmnologin)
Stop (underneath Runlevel 0, kdm should be first)
Stop (underneath Runlevel 6, kdm should be first)
If kdm is already in these places, then, most likely, something is killing your init at bootime.
I'm sorry. I did not understand a WORD of that..lol
I'm fairly new to linux..
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$191.99
Lacie 2big 6TB Raid External Drive Mac Thunderbolt 2 & USB Excellent Condition
$145.00
5 Bay RAID Hard Drive Enclosure USB3.1 TypeC for 2.5" 3.5" SATA HDD SSD - New
$59.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$13.99
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
G-TECHNOLOGY 4TB G-RAID EXTERNAL HARD DRIVE ARRAY WITH THUNDERBOLT LOW USAGE
$113.99
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$140.99