-
Instant GPRS on yr Laptop/PC
Instant GPRS on yr Laptop/PC
MustHaves:
Knoppix 3.4
USB BlueTooth Adapter
BlueTooth Device (SmartPhone/PDA)
GPRS Provider
Connect yr BT USB dongle, (I use MSI BToes)
Boot laptop/pc using Knoppix 3.4
After knoppix is up and running,
Click on the penguin Icon on the taskbar (Knoppix Root)
Network/Internet -->GPRS connection
First Knoppix will configure yr modem/CellPhone (I use Nokia6600)
Click YES;
Select bluetooth: Bluetooth wireless device (i.e cellphone/PDA)
Click OK;
Knoppix then will then Scan for your BT Device.
Click OK if it manage to detect yr BT Device
Then it will prompt a default password = 1234
Click OK;
Set this device to be yr Modem.
Click YES;
Now select your GPRS Provider
Browse to the bottom
Click other: (INIT-String)
Click OK;
Modify the GPRS Provider-String
For Celcom - change "internet" to "CELCOM" (USE UPPERCASE)
(Celcom is my GPRS Provider)
Click OK;
Then a warning regarding GPRS charges will pop-up.
Click YES;
Yr BT Device will then ask for "Passcode for Knoppix-0:"
Key-in any password
Click OK on yr BT Device
Yr Laptop/PC will then ask for a BT Pin,
Key-in the same password
Click OK;
Yr BT Device will then ask for approval to:
Accept connection request from Knoppix-0
(This step will be skipped if Knoppix-0 is already 'Set as authorised' in yr BT device)
Click YES on yr BT Device.
Voila..
Your laptop/pc is connected to internet via GPRS
FaRiS
09/08/2004
Download Article
-
Hi!
I have a problem with laptops:
I already used the same procedure as you on different desktop-PCs with a Nokia 3650 and it did work,
but on te two laptops wich i tried (Asus L3000D and Acer TM 345T) it did not work completely: it starts correctly but after a while it hangs.
I don't think it is a problem of lcp-echo, because I commented out the two lines lcp-echo####, it seems like the problem affected the communication through the usb with the bluetooth device (chip CSR, a Roper ROBTC2-USB), and after it hangs, the GPRS connection on the phone still remains on, and if I try to restart GPRS connection, PPPD restarts, but it does not even try to re-establish the GPRS connection.
I hope you or someone else on the forum still had and solved this problem, but I did not found any solution with the search feature of the site.
Bruno
-
Originally Posted by
br1-69
Hi!
it starts correctly but after a while it hangs.
set
lcp-echo-interval 0
and
lcp-echo-failure 0
in your /etc/ppp/options
and it should work.
Similar Threads
-
By eadix in forum Networking
Replies: 1
Last Post: 06-23-2005, 05:40 PM
-
By eadix in forum Networking
Replies: 0
Last Post: 04-14-2005, 06:44 PM
-
By SilverFox7331 in forum General Support
Replies: 2
Last Post: 10-20-2004, 03:32 PM
-
By ffman in forum Networking
Replies: 0
Last Post: 12-06-2003, 11:24 AM
-
Replies: 5
Last Post: 05-24-2003, 02:00 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301
$140.23
HPE ARUBA 2530-24G J9773A PoE+ 24-PORT GIGABIT ETHERNET SWITCH J9773-60201
$98.15
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97
TRENDnet TEG-S17D 16-Port Gigabit Unmanaged Network Switch
$50.00
NETGEAR GS305300PAS 5 Port Gigabit Ethernet Unmanaged Switch
$15.99
NETGEAR GS305Pv2 5-Port Gigabit Ethernet Unmanaged SOHO Switch W/PoE+
$19.99
TP-Link TL-SG108PE 8-port Gigabit Easy Smart PoE+ Swith w/ 4-port PoE - Sealed
$49.50
NETGEAR 8-Port Gigabit Ethernet Unmanaged Switch GS308 300 Switch series
$27.27
Cisco SG300-52-Port Gigabit Managed Rack Mountable Network Switch
$44.95
HP JG937A Flexnetwork 5130-48G PoE+ 48-Port Gigabit Network Switch
$56.99