I don't know about your SATA drive, but Knoppix does not yet support the AMD64 architecture.Originally Posted by !phil
i've got an amd64 3000+ with 1gig stick of ddr3200 and WD 200 gig SATA drive
it booted from an old 2003 knoppix fine, but of course no sata was detected. so i burned thel atest knoppix 3.4 yesterday (5-17 i think) and i also burned linuxdefender 1.5.6 cebttt or something like that, well, both of them, with pretty much every boot option i try (permutations of knoppix24 knoppix26 linux26 testcd failsafe -b) either hang on "Looking for CDROM in: /dev/scd0" or, if they get past that stage, there is a dmesg about "VIA...SATA: blablabla" that dont look like errors, but then it spit out a ton of errors about "cloop: error -5" and "awk not found" and "total memory found: kB" .....
i'm kind of stumpted. i've an k8v se deluxe board with an onboard promise controller that can has an "ide" option along with "raid", so I selected that and tried to even install windows xp, with "f6" on the install screen and inserting the promise driver floppy, it finds the drivers on that but then does a soft reboot when i tell it to proceed....
ive had stuff like this before, and it may be a hardware error; b ut knoppix 2003 booted fine on it : (
i wi ll try to boot knoppix 3.4 on my old box see if it works...
edit: well it boots like a charm on my old box, so it s not the cd...
but any suggesti ons for now?
I don't know about your SATA drive, but Knoppix does not yet support the AMD64 architecture.Originally Posted by !phil
well i wouldn't think that knoppix not supporting amd64 would be an issue. far as i know, amd64 seamlessly "emulates" 32bit arch -- like i said my old knoppix booted fine on it.
so i dont know what to think. is it my hardware (most likely RAM, since im getting cloop errors and it says "total memory detected: kB" (as in, none) when it is trying to -- i think -- make the ramdisk and mount the root there) ? but if its my hardware, then why does my old knoppix boot withoout a hitch... and if its knoppix, what can i do?
please, someone help :)
i want to be able to install at least *some* os, and knoppix is the first stepping stone to install any other linux since it detects hardware so well (well, not today... sniff)... or maybe someone can suggest a distro that is specially designed to boot with amd64/sata ?
also, i know this is off-topic (off-forum even) but maybe someone can give a hint as to how to install winXP ? -- i have the necessary winxp sata drivers on a floppy but it soft-reboots and i think thats because i my sata hdd is unformatted
which brings me to another point --
when my sata/raid controller is loading up in the POST sequences, it says something of the sort:
no device found
bios not loaded
....
what could that be? :( again, maybe its a totally unformatted hdd?... if so, any pointers? please help <:) many thanks in advance...
--Phil
edit:
i found something in the ms windows forum possibly concerning this...
i have a lite-on dvdrw/cdrw and something like a gsr-52x plain cd reader from mitsumi or LG not sure which one of those 2, well it says LG but i order mitsumi, go figure...anywaay is what kidsatacrux says true? i remember the few times i got knoppix 3.4 to load past the "looking for cdrom" stage (it either happens instantly or it doesnt -- waiting 10-20 minutes for it to crank over, as suggested elsewhere in this forum, hasnt helped me... on a 2ghz comp) the scrolling dmesges had 3 lines with "VIABLABLASATA" loading some stuff apparently successfully... so maybe my sata *is* recognized, but it cannot recognize something else -- and starts griping BIGTIME when trying too mount into RAM.... sniffOriginally Posted by kidsatacrux
i'm kind of starting a semi-crosspost of this thread on http://www.knoppix.net/forum/viewtop...?p=57186#57186 ... because i am starting to think it is not my hardware, but knoppix...
i am still not sure though... :(
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Samsung 256GB (16GBx16) 2Rx4 PC3L-10600R DDR3 ECC RDIMM Server Memory #99
$124.99
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Kingston KCP424SD8/16 16GB DDR4 2400Mhz Memory RAM
$15.00
M386A8K40BM2-CTD SAMSUNG 64GB (1X64GB) 4DRX4 PC4-2666V DDR4 SERVER MEMORY
$40.91
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96